*mydirectindustry

CLG816G

Product catalog summary

Overview: The document provides detailed specifications for the 816G Wheel Loader, emphasizing its robust design suitable for tough environments.

Engine Specifications: The loader is powered by a Yanmar 4TNV98 - ZPYW engine, compliant with Tier 3 / Stage IIIA emission regulations. It delivers a gross power of 50.2 kW (67 hp) and a net power of 47.8 kW (65 hp) at 2,400 rpm. The engine features a peak torque of 238 N•m at 1,600 rpm with a torque rise of 20%.

Transmission: The loader uses a counter shaft-type power shift transmission with a 3-element single-stage torque converter. It has a maximum travel speed of 25 km/h in both forward and reverse, with two speeds available in each direction.

Axles and Steering: The loader is equipped with conventional front and rear differentials and an axle oscillation of 11°. It features articulated steering with a relief pressure of 14.8 MPa.

Brakes: The service brakes are caliper dry disc type, actuated hydraulically, while the parking brake is a mechanically actuated shoe/drum type.

Hydraulic System: The main pump is a gear type with a relief pressure of 18 MPa. The loader's cycle times include a raise time of 4.4 seconds, a dump time of 1.2 seconds, and a float down time of 3 seconds, with a total cycle time of 8.6 seconds.

Loader Arm Performance: The tipping load is 4,895 kg straight and 4,180 kg at full turn. The bucket breakout force is 46 kN, with a maximum dump angle of 45±1° and a dump clearance of 2,283 mm.

Bucket Performance: The reference bucket size is 0.8 m3, with various rollback angles at different positions.

Dimensions: The loader measures 5,574 mm in length with the bucket down, 1,940 mm in width over tires, and has a wheelbase of 2,200 mm. The ground clearance is 285 mm, with a turning radius of 4,208 mm outside of the tire.

Tires: The loader is fitted with 16/70-20 size tires.

Operating Weights and Service Capacities: The operating weight is 5,600 kg. Service capacities include a 95 L fuel tank, 10.2 L engine oil, 14 L cooling system, 72 L hydraulic reservoir, 20 L transmission and torque converter, and 9 L for each axle.

Contact Information: The document provides contact details for Guangxi Liugong Machinery Co., Ltd., including an address in Liuzhou, Guangxi, China, and a website link.

Note: Specifications and designs are subject to change without notice, and machines may include optional equipment.

Catalog excerpts

Engine Gross Power Operating Weight Standard Bucket Size Standard Breakout Force Standard Dump Clearance WHEEL LOADER T OUGH W ORLD. T OUGH E QU IPM ENT.

Open the catalog to page 1

Tier 3 / Stage IIIA Gross Power Peak Torque Torque Rise % TRANSMISSION Transmission Type Counter shaft-type power shift Torque Converter 3 element - single stage, single phase Maximum Travel Speed, fwd Maximum Travel Speed, rev Tipping Load - Straight Tipping Load - Full Turn Bucket Breakout Force Maximum Dump Angle at Full Height Dump Clearance at Full Height Discharge Dump Reach at Full Height Discharge Maximum Hinge Pin Height Maximum Digging Depth, Bucket Level Bucket Rollback at Ground Level Bucket Rollback at Carry Bucket Rollback at Maximum Height Emission Regulation BUCKET PERFORMANCE...

Open the catalog to page 2

CLG816G

CLG816G

Catalog excerpts

All Guangxi Liugong Machinery Co., Ltd. catalogs and technical brochures