*mydirectindustry

856IV Wheel Loaders

Product catalog summary

Engine Specifications:
- Emission Regulation: Tier 4 interim / Stage IIIB
- Make: Cummins
- Gross Power: 164 kW (220 hp) @ 2,200 rpm
- Net Power: 155.8 kW (209 hp) @ 2,200 rpm
- Peak Torque: 949 N·m @ 1,500 rpm
- Displacement: 6.7 L
- Number of Cylinders: 6
- Aspiration: Turbo air-to-air aftercooled

Transmission:
- Type: Countershaft power shift
- Torque Converter: Single-stage, three-element
- Maximum Travel Speed: 38.5 km/h (forward), 23.6 km/h (reverse)
- Number of Speeds: 4 (forward), 3 (reverse)

Axles:
- Differential Type: Limited slip (front and rear)
- Axle Oscillation: ±12°

Steering:
- Configuration: Articulated
- Relief Pressure: 17 MPa

Brakes:
- Service Brake Type: Wet multi disc, hydraulic actuation
- Parking Brake Type: Auto and manual electronic controlled, spring apply; hydraulic release

Hydraulic System:
- Main Pump Type: Vane
- Main Relief Pressure: 20 MPa
- Cycle Times: Raise - 6.5 s, Dump - 1.5 s, Float Down - 3.5 s, Fastest Total Cycle - 11.5 s

Loader Arm Performance:
- Tipping Load: 14,082 kg (straight), 12,347 kg (full turn)
- Bucket Breakout Force: 164 kN
- Maximum Dump Angle: 45°
- Dump Clearance: 3,101 mm
- Maximum Hinge Pin Height: 4,150 mm

Bucket Performance:
- Reference Bucket Size: 3.3 m3

Dimensions:
- Length with Bucket Down: 8,280 mm
- Width Over Tires: 2,750 mm
- Wheelbase: 3,250 mm
- Ground Clearance: 428 mm
- Turning Radius: 6,393 mm (outside of tire), 6,094 mm (center of tire), 6,780 mm (bucket carry)

Tires:
- Size: 23.5 R 25

Operating Weights:
- Operating Weight: 18,200 kg

Service Capacities:
- Fuel Tank: 370 L
- Engine Oil: 17 L
- Cooling System: 71 L
- Hydraulic Reservoir: 245 L
- Transmission and Torque Converter: 45 L
- Axles, each: 34 L

Additional Information:
- Manufacturer: Guangxi Liugong Machinery Co., Ltd.
- Contact: +86 772 388 6124, [email protected]
- Note: Specifications and designs are subject to change without notice.

Catalog excerpts

Engine Cummins Standard Bucket Size 3.3 m3 Standard Breakout Force 164 kN Standard Dump Clearance 3,101 mm

Open the catalog to page 1

LiuGong Tier 4 interim / Stage IIIB Cummins 164 kW (220 hp) @ 2,200 rpm 155.8 kW (209 hp) @ 2,200 rpm 949 N-m @ 1,500 rpm 6.7 L 6 Turbo air - to - air aftercooled countershaft power shift single-stage, three-element 38.5 km/h 23.6 km/h 4 3 limited slip limited slip ±12° ENGINE Emission Regulation Make Gross Power Net Power Peak Torque Displacement Number of Cylinders Aspiration TRANSMISSION Transmission Type Torque Converter Maximum Travel Speed, fwd Maximum Travel Speed, rev Number of Speeds, fwd Number of Speeds, rev AXLES Differential Front Type Differential Rear Type Axle Oscillation STEERING Steering...

Open the catalog to page 2

856IV Wheel Loaders

856IV Wheel Loaders

Catalog excerpts

All Guangxi Liugong Machinery Co., Ltd. catalogs and technical brochures