*mydirectindustry

856III Wheel Loaders

Product catalog summary

Engine Specifications
- Make: Cummins
- Tier: Tier 3 / Stage IIIA
- Gross Power: 164 kW (220 hp) @ 2,200 rpm
- Net Power: 155.8 kW (209 hp) @ 2,200 rpm
- Peak Torque: 949 N·m @ 1,500 rpm
- Displacement: 6.7 L
- Number of Cylinders: 6
- Aspiration: Turbo air-to-air aftercooled

Transmission
- Type: Countershaft power shift
- Torque Converter: Single-stage, three-element
- Maximum Travel Speed: 38 km/h (forward), 24 km/h (reverse)
- Number of Speeds: 4 (forward), 3 (reverse)

Axles
- Differential Type: Limited slip (front and rear)
- Axle Oscillation: ±11°

Steering
- Configuration: Articulated
- Relief Pressure: 16 MPa

Brakes
- Service Brake: Wet multi disc, hydraulic actuation
- Parking Brake: Auto and manual electronic controlled, spring apply; hydraulic release

Hydraulic System
- Main Pump Type: Vane
- Main Relief Pressure: 20 MPa
- Cycle Times: Raise - 6.1 s, Dump - 1.3 s, Float Down - 3.5 s, Total - 10.9 s

Loader Arm Performance
- Tipping Load: 15,148 kg (straight), 13,330 kg (full turn)
- Bucket Breakout Force: 162 kN
- Maximum Dump Angle: 45°
- Dump Clearance: 3,100 mm
- Maximum Hinge Pin Height: 4,150 mm

Bucket Performance
- Reference Bucket Size: 3 m3

Dimensions
- Length with Bucket Down: 8,224 mm
- Width Over Tires: 2,750 mm
- Wheelbase: 3,250 mm
- Ground Clearance: 431 mm
- Turning Radius: 6,094 mm (outside of tire)

Tires
- Size: 23.5 R 25

Operating Weights
- Operating Weight: 18,450 kg

Service Capacities
- Fuel Tank: 310 L
- Engine Oil: 16 L
- Cooling System: 36 L
- Hydraulic Reservoir: 245 L
- Transmission and Torque Converter: 40 L
- Axles: 34 L each

Additional Information
- Manufacturer: Guangxi Liugong Machinery Co., Ltd.
- Contact: +86 772 388 6124, [email protected]
- Note: Specifications and designs are subject to change without notice.

Catalog excerpts

856 IIIWheel Loader Engine Gross Power Net Power Operating Weight Standard Bucket Size Standard Breakout Force Standard Dump Clearance

Open the catalog to page 1

856 IIIWheel Loader Tier 3 / Stage IIIA Cummins 164 kW (220 hp) @ 2,200 rpm 155.8 kW (209 hp) @ 2,200 rpm 949 N-m @ 1,500 rpm 6.7 L 6 turbo air - to-air aftercooled countershaft power shift single-stage, three-element 38 km/h 24 km/h 4 3 limited slip limited slip ±11° ENGINE Tier Make Gross Power Net Power Peak Torque Displacement Number of Cylinders Aspiration TRANSMISSION Transmission Type Torque Converter Maximum Travel Speed, fwd Maximum Travel Speed, rev Number of Speeds, fwd Number of Speeds, rev AXLES Differential Front Type Differential Rear Type Axle Oscillation STEERING Steering Configuration Steering...

Open the catalog to page 2

856III Wheel Loaders

856III Wheel Loaders

Catalog excerpts

All Guangxi Liugong Machinery Co., Ltd. catalogs and technical brochures