856III TC (tool carrier/ parallel linkage) Wheel Loaders

Product catalog summary

Engine Specifications
- Make: Cummins
- Gross Power: 164 kW (220 hp) @ 2,200 rpm
- Net Power: 155.8 kW (209 hp) @ 2,200 rpm
- Peak Torque: 949 N·m @ 1,500 rpm
- Displacement: 6.7 L
- Number of Cylinders: 6
- Aspiration: Turbo air-to-air aftercooled

Transmission
- Type: Countershaft power shift
- Torque Converter: Single stage, three-element
- Maximum Travel Speed: 38 km/h (forward), 24 km/h (reverse)
- Number of Speeds: 4 (forward), 3 (reverse)

Axles
- Differential Type: Limited slip (front and rear)
- Axle Oscillation: ±14°

Steering
- Configuration: Articulated
- Relief Pressure: 16 MPa

Brakes
- Service Brake Type: Wet multi-disc, hydraulic actuation
- Parking Brake Type: Auto and manual electronic controlled, spring apply; hydraulic release

Hydraulic System
- Main Pump Type: Vane
- Main Relief Pressure: 20 MPa
- Cycle Times: Raise - 5.5 s, Dump - 2.5 s, Float Down - 3.5 s, Fastest Total Cycle - 11.5 s

Loader Arm Performance
- Tipping Load: 14,033 kg (straight), 12,419 kg (full turn)
- Bucket Breakout Force: 162 kN
- Maximum Dump Angle: 45°
- Dump Clearance: 2,989 mm
- Maximum Hinge Pin Height: 4,186 mm

Bucket Performance
- Reference Bucket Size: 3 m3

Dimensions
- Length with Bucket Down: 8,453 mm
- Width Over Tires: 2,750 mm
- Wheelbase: 3,250 mm
- Ground Clearance: 431 mm
- Turning Radius: 6,094 mm (outside of tire), 5,794 mm (center of tire), 7,015 mm (bucket carry)

Tires
- Size: 23.5 R 25

Operating Weights
- Operating Weight: 18,650 kg

Service Capacities
- Fuel Tank: 310 L
- Engine Oil: 16 L
- Cooling System: 36 L
- Hydraulic Reservoir: 245 L
- Transmission and Torque Converter: 40 L
- Axles, each: 34 L

Additional Information
- Manufacturer: Guangxi Liugong Machinery Co., Ltd.
- Contact: +86 772 388 6124, [email protected]
- Note: Specifications and designs are subject to change without notice.

Catalog excerpts

856III TC (tool carrier/ parallel linkage) Wheel Loaders-1

Engine Gross Power Net Power Operating Weight Standard Bucket Size Standard Breakout Force Standard Dump Clearance

Open the catalog to page 1

856III TC (tool carrier/ parallel linkage) Wheel Loaders-2

LiuGong ENGINE Tier Make Gross Power Net Power Peak Torque Displacement Number of Cylinders Aspiration TRANSMISSION Transmission Type Torque Converter Maximum Travel Speed, fwd Maximum Travel Speed, rev Number of Speeds, fwd Number of Speeds, rev AXLES Differential Front Type Differential Rear Type Axle Oscillation STEERING Steering Configuration Steering Relief Pressure countershaft power shift single stage, three - element 38 km/h 24 km/h 4 3 limited slip limited slip ±14° BRAKES Service Brake Type wet multi disc Service Brake Actuation hydraulic Parking Brake Type auto and manual electronic...

Open the catalog to page 2