*mydirectindustry

835III Wheel Loaders

Product catalog summary

Engine Specifications:
- Emission Regulation: Tier 3/Stage IIIA
- Make: Cummins
- Gross Power: 119 kW (160 hp) @ 2,200 rpm
- Net Power: 108 kW (145 hp) @ 2,200 rpm
- Peak Torque: 732 N·m @ 1,400 rpm
- Displacement: 6.7 L
- Number of Cylinders: 6
- Aspiration: Turbo air-to-air aftercooled

Transmission:
- Type: Countershaft power shift
- Torque Converter: Single-stage, three-element
- Max Travel Speed (fwd): 38 km/h
- Max Travel Speed (rev): 24.7 km/h
- Number of Speeds (fwd): 4
- Number of Speeds (rev): 3

Axles:
- Differential Front Type: Limited slip
- Differential Rear Type: Limited slip
- Axle Oscillation: ±11°

Steering:
- Configuration: Articulated
- Relief Pressure: 15 MPa

Brakes:
- Service Brake Type: Full hydraulic wet-discs
- Service Brake Actuation: Hydraulic
- Parking Brake Type: Auto/manual pneumatic control
- Parking Brake Actuation: Spring apply; hydraulic release

Hydraulic System:
- Main Pump Type: Vane
- Main Relief Pressure: 20.7 MPa
- Raise: 5.6 s
- Dump Time: 2.0 s
- Float Down Time: 3.8 s
- Fastest Total Cycle Time: 10.9 s

Loader Arm Performance:
- Tipping Load - Straight: 9,180 kg
- Tipping Load - Full Turn: 7,960 kg
- Bucket Breakout Force: 93.5 kN
- Maximum Dump Angle at Full Height: 60.5°
- Dump Clearance at Full Height Discharge: 2,930 mm
- Dump Reach at Full Height Discharge: 1,059 mm
- Maximum Hinge Pin Height: 3,960 mm
- Maximum Digging Depth, Bucket Level: 25 mm
- Bucket Rollback at Ground Level: 42°
- Bucket Rollback at Carry: 48.5°
- Bucket Rollback at Maximum Height: 48.5°

Bucket Performance:
- Reference Bucket: 1.9 m3

Dimensions:
- Length with Bucket Down: 7,500 mm
- Width Over Tires: 2,470 mm
- Wheelbase: 2,950 mm
- Wheel Tread: 1,950 mm
- Ground Clearance: 420 mm
- Turn Angle, Either Side: 40°
- Rear Angle of Departure: 30°
- Turning Radius, Outside of Tire: 5,340 mm
- Turning Radius, Center of Tire: 5,070 mm
- Turning Radius, Bucket Carry: 5,880 mm

Tires:
- Tire Size: 20.5 R 25

Operating Weights:
- Operating Weight: 13,200 kg

Service Capacities:
- Fuel Tank: 240 L
- Engine Oil: 15 L
- Cooling System: 35 L
- Hydraulic Reservoir: 150 L
- Transmission and Torque Converter: 28 L
- Axles, each: 28 L

Additional Information:
- Manufacturer: Guangxi Liugong Machinery Co., Ltd.
- Contact: +86 772 388 6124, [email protected]
- Note: Specifications and designs are subject to change without notice. Machines shown may include optional equipment.

Catalog excerpts

Engine Cummins Standard Bucket Size 1.9 m3 Standard Dump Clearance 2,930 mm

Open the catalog to page 1

835 IIIWheel Loader ENGINE Emission Regulation Make Gross Power Net Power Peak Torque Displacement Number of Cylinders Aspiration TRANSMISSION Transmission Type Torque Converter Maximum Travel Speed, fwd Maximum Travel Speed, rev Number of Speeds, fwd Number of Speeds, rev AXLES Differential Front Type Differential Rear Type Axle Oscillation STEERING Steering Configuration Steering Relief Pressure BRAKES Service Brake Type Service Brake Actuation Parking Brake Type Parking Brake Actuation HYDRAULIC SYSTEM countershaft power shift single - stage, three - element 38 km/h 24.7 km/h 4 3 LOADER ARM...

Open the catalog to page 2

835III Wheel Loaders

835III Wheel Loaders

Catalog excerpts

All Guangxi Liugong Machinery Co., Ltd. catalogs and technical brochures