Walk-In Composite Salt Spray Test Chamber

1 / 1 PageView full catalog

Walk-In Composite Salt Spray Test Chamber

Product catalog summary

Specifications:

Capacity: 110–1,500 L, customizable.
Temperature Range: -40°C to +85°C with ±1°C stability.
Salt Spray (NSS/AASS/CASS): Utilizes a 5% NaCl solution with a pH range of 4.0–7.2.
Cyclic Conditions: Relative humidity between 45% and 96%.
Cycle Customization: Duration can be set between 1 to 99 hours.
Spray System: Delivers 1.0–2.0 mL/hr per 80 cm².

Procedures and Applications:

TESTEQ specializes in designing and producing specialized chambers for corrosion testing, particularly in the automotive sector. These chambers can accommodate entire vehicles or specific components, exposing them to alternating high and low temperatures, wet and dry conditions, and direct salt solution washing. This comprehensive cycling test can last for several weeks, simulating real-world conditions.

Catalog excerpts

Walk-In Composite Salt Spray Test Chamber-1

W-STH Series Salt Spray Test Chamber Capacity : 110–1,500 L(customizable) Temperature Range: -40°C to +85°C (±1°C stability). Salt Spray (NSS/AASS/CASS): 5% NaCl solution, pH 4.0–7.2 Cyclic Conditions: 45~96%RH Cycle Customization: 1–99 hrs Spray System: 1.0–2.0 mL/hr per 80 cm² TESTEQ has also an extensive experience in the design and production of special chambers for corrosion testing, mainly for the automotive ﬁeld: entire vehicles or relevant components can be subjected to the alternation of high and low temperatures, wet and dry conditions, direct salt solution washing (i.e. splash test, salt rain) inside a global cycling test with duration of

Open the catalog to page 1