Catalogs >
Guangdong Jian Qiao Testing Equipment Co., Ltd. >
JY-100

JY-100
5Pages

Catalog excerpts

Product introduction Battery pack rush tester simulates various power battery packs and systems during transportation, storage and use The battery pack is subjected to collision and crushing, and artificially presents different conditions that may occur when the battery is subjected to crushing.

Open the catalog to page 1

testing object:Battery pack or system Pressurize according to the following conditions: -Squeeze plate form: semi-cylindrical with a radius of 75mm. The length of the semi-cylindrical body is greater than the height of the test object, but not more than 1 m. -Extrusion direction: X and Y directions (the X-axis of the car is traveling in the direction of the X-axis, and the horizontal direction is the Y-axis perpendicular to the direction of travel). For the safety of the test operation, the test can be performed on two test objects separately. -Extrusion degree: stop extrusion when the...

Open the catalog to page 2

Transfer method Squeeze force range Measureable battery size MachineCrush stroke Crush direction Power display Control method Unit conversion Displacement resolution Data sampling frequency Signal transmission method Pressure control accuracy Crush speed Hydraulic drive 20T/50T/100T/200T/300T (optional or customized according to customer requirements) (500~3000)*(500~2000)*(500~1000)mm(WD-H) 500mm~2000mm Vertically perpendicular to the direction of the battery plate or parallel to the direction in which the module is most likely to be squeezed in the overall vehicle layout or perpendicular...

Open the catalog to page 3

Standards compliant GB/T31485-201 5 Safety requirements and test methods for power batteries for electric vehicles QC/T741-2014 Vehicle supercapacitor QC/T742-2006 Lead-acid battery for electric vehicles QC/T743-2006 Lithium ion battery for electric vehicles QC/T744-2006 Metal hydride nickel battery for electric vehicles GB/T1 8333.2-201 5 Zinc air battery for electric vehicles UL2580-2013 Electric vehicle battery safety standard SAND99-0497 American automotive power battery test standard QBT 2947.3-2008 Battery and charger for electric bicycles Part 3 Lithium-ion batteries and chargers...

Open the catalog to page 4

1. Flame-resistant and explosion-proof design of the test area The test area is composed of high temperature resistant and flame retardant parts (no plastic pipes, wires, rubber gaskets, seals, lubricating oil, engine oil, etc.) to prevent damage to the equipment caused by battery burning and explosion. 2. Anti-rust and corrosion-resistant design of the test area The surface of the steel frame in the test area is sprayed, and the guide rod is plated with hard chrome coating. It has high-strength, waterproof, rust-proof and corrosion-resistant design, so as to avoid the bad result of using...

Open the catalog to page 5