Catalogs >
Guangdong Jian Qiao Testing Equipment Co., Ltd. >
JQ-8108

JQ-8108
2Pages

Catalog excerpts

Product introduction The battery drop test device mainly simulates the product's resistance to drop and impact, and can achieve the drop test of the test surface, edge and angle. The equipment is mainly used to assess the ability of product packages to withstand falling during transportation and handling, thereby improving and perfecting the packaging design. Features • Pneumatic structure, the test piece is placed in a special fixture (adjustable stroke), press the drop button, the cylinder is loose, and the test piece will be free fall test. • Encoder display height, intelligent control (0-1500 adjustable, very convenient for customers) • The front door of the test box is reinforced. The left side of the door is equipped with an exposed hinge, the right side is equipped with a strong door lock, the effective door is blocked, and the • hinges and locks are reinforced with standard equipment. • 4 casters on the bottom for easy movement and fixing • This machine adopts PLC touch screen control system, which is convenient and intuitive, and can easily control the test parameters of each input. • 4-Layers explosion-proof glass window with explosion-proof membrane, protective steel mesh, double protection • Illumination function, installed on the outside of the window, reflected to the inner box, can clearly see the condition of the inner box and ensure the life and safety of the light • A pressure relief device is installed on the upper rear of the bottom of the tank. When the pressure reaches the pressure of the pressure switch, the pressure gate opens to automatically relieve pressure. • The test area of the test box is an independent test area, the test area size is W500*D300*H500 mm, and the test area box is made of stainless steel SUS304.

Open the catalog to page 1

standard GB 31241-2014 "Lithium-ion batteries and battery packs for portable electronic products - Safety requirements" standard requirement: After the battery is fully charged according to the specified test method, it will fall freely on the concrete slab according to the drop height of Table 8. Drop height rating Drop height For samples such as hand-held electronic devices that are intended to use a portable electronic product with a height higher than 1.0 m and have a capacity exceeding 1000 mAh, the drop height should be 1.5 m. The two end faces of the cylindrical and button type...

Open the catalog to page 2