Catalogs >
Guangdong Jian Qiao Testing Equipment Co., Ltd. >
JQ-8106

JQ-8106
2Pages

Catalog excerpts

By testing the safety performance of the battery from different weights and different stress areas of different heights, the test shall be carried out according to the regulations, and the battery shall not ignite or explode. It is also an indispensable testing equipment for battery manufacturers and research institutes. Features * Standard 9.1 Kg weight and diameter 1 5.8mm horizontal bar length > 60mm (can meet differ* ent standards at the same time) * Encoder display height, intelligent control 610mm (0-700 adjustable, very convenient for customers) * The front door of the test box is reinforced. The left side of the door is equipped with an * exposed hinge, the right side is equipped with a strong door lock, the effective door is * blocked, and the hinges and locks are reinforced with standard equipment. * 4 casters on the bottom for easy movement and fixing * This machine adopts PLC touch screen control system, which is convenient and intuitive, and * can easily control the test parameters of each input. * Explosion-proof glass window with explosion-proof membrane, protective steel mesh, double protection Illumination function, installed on the outside of the window, reflected to the inner box, can clearly see the condition of the inner box and ensure the life and safety of the light A pressure relief device is installed on the upper rear of the bottom of the tank. When the pressure reaches the pressure of the pressure switch, the pressure gate opens to automatically relieve pressure. The double-column design weight falls to reduce the weight of the weight and the four walls to achieve a free fall, and effectively prevent safety problems The test area of the test box is an independent test area, the test area size is W500*D300*H500 mm, and the test area box is made of stainless steel SUS304.

Open the catalog to page 1

The test sample battery is placed on a flat surface. A 1 5.8 mm diameter rod was placed at the center of the sample. A 9.1 KG weight dropped from the height of 610 mm onto the sample. As long as each sample battery is subjected to one impact, a different sample is used for each test.

Open the catalog to page 2