Catalogs >
Guangdong Jian Qiao Testing Equipment Co., Ltd. >
JQ-6052

JQ-6052
5Pages

Catalog excerpts

Battery washing test machine, which relates to the technical field of battery testing equipment, in particular to a battery washing test machine, the frame body is provided with a test box body, the lower part of the test box body is provided with a washing box, and the test box body is provided with a rotating paddle a drying device is arranged on the side of the test box, and the input end of the rotating paddle is connected to the driving motor. The washing box is a box with a lifting structure, and the washing box rises to form a sealed cavity with the upper edge of the test box, and the frame body is provided There is a control panel and a water tank, and the washing box is electrically connected through the pipeline and the water tank. The structure design is scientific, and the battery washing is completely solved by manual step by step, which greatly shortens the test time, improves the test precision, saves time and labor.

Open the catalog to page 1

• The inner chamber of the machine is standard 1.2mm thick SUS#304 stainless steel, and the outer box is electrostatic painting of standard 1.2mm electrolytic board. • Special fixture for washing and rotating paddle material: SUS#316 stainless steel, with strong acid and alkali resistance and corrosion resistance. A set of fixtures with small batteries and a large battery (such as the battery used by IPAD), making it easy for users to change fixtures, making them more convenient to use. The equipment door is equipped with a safety sensor switch. When the test box door is opened, the •...

Open the catalog to page 2

Working principle After the purified water is added to the liquid recovery tank, adjust the pH of the test water by adding sodium hydroxide solution. After the PH meter measures the solution, click the test to start: gradually complete the test steps of soaking-stirring-dehydration-drying according to the standard requirements. . After the test is completed, the system’s three-color sound and light alarm light will sound and light alarm, and the test is over. According to the standard GB31241 -2014 The system adopts advanced high-resolution PLC+ industrial touch screen automatic control....

Open the catalog to page 3

The test is carried out after the sample is fully charged according to the specified test method. The test is carried out as follows: a) Dosing:Configure a solution with a pH of 1 1.0 ± 0.1 (using a 0.004% NaOH solution) and heat the solution to (45 ± 2) ° C b) Soaking:The sample was fixed on the rotating device (see Appendix E.3), and then the sample was placed in the solution (the center of the battery was at a height of 300 mm ± 10 mm from the liquid level) and immersed for 0.5 h. The temperature of the solution was maintained during the test (45 ± 2). ) ° C c) Stirring:The sample was...

Open the catalog to page 4