Catalogs >
Guangdong Jian Qiao Testing Equipment Co., Ltd. >
JP-7006

JP-7006
4Pages

Catalog excerpts

Product introduction The battery seawater immersion testing machine is mainly used for connecting the battery to the whole vehicle wiring harness in the actual vehicle assembly state. Then, it is immersed in the seawater component at room temperature for 2 hours in the actual vehicle assembly direction (seawater is simulated seawater component, concentration is 3.5% NaCI solution) The depth of the seawater in the sink is sufficient to flood the tested battery pack

Open the catalog to page 1

1 .The main structure of the whole machine is welded with square tube, and the position of the forklift is placed under the machine, which is convenient for moving in the replacement place. 2.Battery lifting device: driven by motor, it can be lifted and lowered by linear guide and chain drive. At the same time, the peripheral bracket of the device can be moved forward and backward through the transmission of the bottom motor and the guide rail. After the test is completed, the battery is lowered by the lifting mechanism, which is convenient for the installation of the battery pack during...

Open the catalog to page 2

Schematic diagram of seawater immersion test machine Seawater immersion test machine working principle diagram iming belt

Open the catalog to page 3

Standards compliant GB/T 31467.3-2015 Lithium-ion battery packs and systems for electric vehicles - Part 3: Safety requirements GB/T 31485-201 5 Safety requirements and test methods for power batteries for electric vehicles Security 1 .When the water level is low, the power is automatically cut off, and the safety warning light device is dynamically displayed/beep alarm. 2.When the temperature is over temperature, the heater power is automatically cut off, and the safety warning light device is dynamically displayed. 3.When the water level of the reagent (brine) is low, the safety warning...

Open the catalog to page 4