Catalogs >
Guangdong Jian Qiao Testing Equipment Co., Ltd. >
FZ-8201

FZ-8201
3Pages

Catalog excerpts

Product introduction The battery pack lip test device is an analog battery pack or system installed on an electric car. When the car has a high angle of uphill, downhill, rollover, flip, etc. during driving, observe the battery pack or system may appear differently, situation. Present the actual use of the battery pack or system in the laboratory, find problems, solve problems, optimize product design, and improve product quality. The battery pack flip test device is a power battery pack or a special test instrument for system safety test. It is the best choice for lithium battery pack manufacturers, electric vehicle manufacturers and scientific research and testing units. Test description testing object:Battery Pack and system experiment procedure: The battery pack or system is rotated 360 degrees around the X-axis at 90 degrees / 1 5 seconds, then rotated in 90-degree increments, and every other 90 degrees increments for 1 hour to rotate 360 degrees. Observe for 2 hours. The battery or system is rotated 360 degrees around the Y-axis at 90 degrees / 1 5 seconds, then rotated in 90-degree increments, held for 1 hour every 90 degrees increments, and rotated 360 degrees to stop. Observe for 2 hours.

Open the catalog to page 1

Test judgment: When the battery pack or system is tested for inversion, there is no leakage of the battery pack or system, cracking of the casing, fire or explosion. And keep the connection reliable, the structure is intact, after the test, when the insulation resistance test is performed, the AC resistance value is not less than 500Q/V, or the DC resistance value is not less than 1 OOQ/V. Parameter 2.1 Test object is storage battery or system 2.2 The test object is rotated 360° around the X axis at 6° /S speed, then rotated in 90° increments, held at 1 H every 90° increments, rotated 360°...

Open the catalog to page 2