Vehicle Lithium Battery Pack Module Large Walk In Altitude Simulation Test Room
1Pages

{{requestButtons}}

Catalog excerpts

Vehicle Lithium Battery Pack Module Large Walk In Altitude Simulation Test Room - 1

Walk in Altitude Simulation Test Chamber walk In Altitude Test Chambers Performance parameters BE-8203-5m³ BE-8203-12m³ Internal Dimension W1600 X D2400 Xx H1300mm W2000 X D3000 X H2000mm External Dimension W2050 X D2700 X H2200mm W2450 X D3300 X H2900mm Equipment weight Approx 6 ton Approx 9ton Power Supply AC 380V,6.0KW AC 380V,8.0KW Pressure Range 10.0KPa—101.3KPa (Adjustable) Pressure Reducing Time Less than 30 min Pressure Recovery Time Less than 30 min Pressure Maintenance ≥ 10 hours High Tension Terminal 4 pieces, Max. DC 500A,1000V Low Tension Terminal 4 pieces, Max. DC 500A,1000V Data Cable Interface 2 groups, DB9 line = Observe Window W400 X H600 mm Auto Door Adopt hydraulic automatic open design Inner Material SUS304+# stainless steel+45# steel External Material SECC steel plate, powder painted Power Supply AC 380V,6.0KW Other Requirement PLC touch screen control + computer remote control. Can be charge and discharge in vacuum condition. Inner chamber has signal wire interface. Lighting system and video monitor system Slide rail installed, test object can be carried into and out automatically. Related Standard Test Requirements 1.Test Object: battery pack and system 2. Test Conditions: Altitude 4000m or the equate air pressure condition, at room temperature. 3.The test objects stay in the test condition as Item 2 for 5 hours. 4.Subject the test object to 1C(no more than 400A) constant current discharge until reaching the cutoff condition. 5. After testing, observe for 2h under the room temperature. DGB

Open the catalog to page 1

All Guangdong Bell Experiment Equipment Co. catalogs and technical brochures

Archived catalogs