1. Catalogs
  2. Guangdong Bell Experiment Equipment Co., Ltd
  3. Lithium Lion Battery Cell Pack Module Flammability Testing Machine

Lithium Lion Battery Cell Pack Module Flammability Testing Machine

Lithium Lion Battery Cell Pack Module Flammability Testing Machine

Product catalog summary
Related Standard Test Requirements:
- UL 1642
- GB 31241-2014
Performance Parameters:
  • Model: BE-8105
  • Structure: All-in-one structure with explosion-proof lock and chain on the door
  • Burner: Bunsen burner with an inner diameter of 0.375 inch (9.5mm) and length approximately 100mm
  • Flame Application Time: 99 hours, 59 minutes, 59 seconds
  • Flame Height: Adjustable between 10mm to 75mm ±2mm
  • Mesh Placement: Approximately 38mm above the flame (as per GB31241-2014)
  • Test Rod Diameter: 1/4 inch (6.35mm) x 14 inch (355.6mm)
  • Enclosure: Octagon shape stainless steel mesh with a distance of 24 inches (610mm) between parallel sides and a height of 14 inches (305mm)
  • Angleiron Specification: 12.7mm x 12.7mm
  • Mesh Top Cover: Square shape with a length of approximately 650mm
  • Test Aluminum Mesh Specification: 0.010 inch (0.25mm) 16 grit x 16 grit
  • Test Round Hole Surface Diameter: 102mm
  • Ignition Device: Automatic ignition
Display and Control:
  • Display Mode: PLC touch and remote control
  • Observation Window: 390x360mm with 20mm thick explosion-proof glass and stainless steel mesh
  • Control Method: Remote and automatic control throughout the test
Combustion Gas Requirements:
High purity liquefied petroleum gas (prepared by user)
Data Output:
Test data can be output directly via USB flash disk
Safety Protection:
  • Explosion-proof pressure relief device
  • Smoke exhaust device
  • Fire extinguishing system
  • Electronic door lock system
  • Safety stop switch
Options:
  • Temperature acquisition system
  • Voltage acquisition system
  • Video monitoring system
Product:
DGBELL Battery Burning Tester, Battery Burning Test Chambers, Flammability tester, Flammability Test Chamber
See more

Catalog excerpts

Lithium Lion Battery Cell Pack Module Flammability Testing Machine-1

Battery Burning Tester Battery Burning Test Chambers Flammability tester Flammability Test Chamber Related Standard Test Requirements UL 1642 GB 31241-2014 Performance parameters Model All-in-one structure, the door with explosion-proof lock and explosion-proof chain Bunsen burner with inner diameter of 0.375inch (9.5mm) and length approx. 100mm Flame Application Time Flame Height *10~75+£2mm (Adjustable) *Mesh should be placed approx. 38mm above the flame (GB31241-201 4) Test Rod Diameter Octagon Shape Stainless Steel Mesh Enclosure Distance between each parallel sides: 24 inches (610mm) Height: 14 inches (305mm). Angleiron:spec. 12.7mmX12.7mm Mesh Top Cover Square shape with length approx. 650mm Test Aluminum Mesh Specification 0.010inch (0.25mm) 16 grit x16 grit Test Round Hole Surface Diameter Ignition Device Automatic ignition Display Mode PLC touch + Remote control Observation window 390x360mm (20mm thick explosion-proof glass, install explosion-proof stainless steel mesh) Control Method Remote control, automatic control through the entire test. Combustion Gas Requirements High purity liquefied petroleum gas. (Prepared by user) Data Output Test data can be output by USB flash disk directly . Safety Protection Explosion-proof pressure relief device, smoke exhaust device, fire extinguishing system, electronic door lock system, safety stop switch Options Temperature acquisition system, voltage acquisition system, video monitoring system DGBELL

 Open the catalog to page 1

All Guangdong Bell Experiment Equipment Co., Ltd catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.