Lithium Battery Impact test chamber UN 38.3

Product catalog summary

Overview: The document outlines the specifications and procedures for conducting the UN 38.3 test, specifically focusing on the Lithium Battery Impact Test. This test is crucial for ensuring the safety and reliability of lithium batteries during transportation.

Specifications: The test chamber, tester, and machine are designed to simulate conditions that batteries might encounter during transit. Key specifications include the ability to apply a specified force to the battery and measure its response.

Procedures: The document details the step-by-step process for conducting the impact test. This includes preparing the battery, setting up the test equipment, and executing the test under controlled conditions.

Standards and Norms: The test adheres to international safety standards, ensuring that batteries meet the necessary criteria for safe transport. Compliance with these standards is mandatory for manufacturers.

Recommendations: It is recommended that all lithium batteries undergo this impact test to prevent potential hazards during shipping. Regular calibration and maintenance of the testing equipment are also advised to ensure accurate results.

Key Data: The document may include tables or charts illustrating the force applied during the test and the battery's performance metrics. These data points are critical for assessing compliance with safety standards.

Catalog excerpts

Lithium Battery Impact test chamber UN 38.3-1

Related Standard Test Requirements UL1642 UN 38.3 Performance parameters Model BE-8106 Structure All-in-one structure, the door with explosion-proof lock and explosion-proof chain Drop Balt Weight 9.1 kg ± 0.1 kg Dropping Height (HZ70mm (Adjustable) Control Mode PLC Touch Screen Control Remote Control inner Cabinet Dimension W500 X D300 X HSOOmm 1 .Ornm thickness SUS 304# Stainless steel (reinforced). Total 80mm thickness internal Material together with external chamber. ' External Material 1.5mm thickness Cool-rolled plate Air vent Diameter: 150mm, at the top of chamber back _ 390 X 360mm [20mm thick explosion-proof glass, install explosion-proof Observation wmdow stainless steel mesh) Lifting Mode Electric Top / Bottom Impact Surface Steel Plate Data Output Safety Protection Options Testdata can be output by USB flash disk directly „ Explosion-proof pressure relief device, smoke exhaustdevice, fire extinguishing system, electronic door lock system, safety stop switch Temperature acquisition system, voltage acquisition system, video monitoring system

Open the catalog to page 1