Lithium Battery 3 zone High and Low Temperature Test Chamber THERMALBTTD3 series

Product catalog summary

Overview of High and Low Temperature Test Chambers

This document references two types of temperature test chambers designed for controlled environmental testing: a 3-zone chamber and a 4-zone chamber. These chambers are used to simulate various temperature conditions for testing purposes.

Main Sections

1. Specifications

3-Zone Chamber: Designed to provide three distinct temperature zones, allowing simultaneous testing under different temperature conditions.
4-Zone Chamber: Provides four separate temperature zones for more complex or varied testing requirements.

2. Functional Capabilities

Both chambers support high and low temperature testing, enabling evaluation of materials or products under extreme temperature variations.
Zone separation ensures precise control and isolation of temperature conditions within each compartment.

3. Applications

Used in quality control, research and development, and reliability testing across industries such as electronics, automotive, and materials science.

4. Recommendations and Best Practices

Ensure proper calibration of temperature sensors in each zone for accurate testing results.
Regular maintenance of chamber components to maintain consistent temperature control.
Use appropriate safety protocols when operating chambers at extreme temperatures.

Summary

The 3-zone and 4-zone High and Low Temperature Test Chambers provide versatile solutions for environmental testing by offering multiple controlled temperature zones. Their design supports rigorous testing requirements, ensuring products can withstand a range of temperature conditions.

Catalog excerpts

Lithium Battery 3 zone High and Low Temperature Test Chamber THERMALBTTD3 series-1

Structure Air Supply Mode Temperature Range Temperature Fluctuation Heating Rate Cooling Rate Temperature Uniformity Temperature Deviation Observation Window Cable Port Cooling Method Compressor Control Method Inner Chamber Material Outer Chamber Material Power Safety Protection Communication Protocol Testing chamber is designed with a three-compartment structure (upper, middle, and lower compartments) Forced internal circulation, from upper to lower air supply circuilation B: -20°C to +150T C: -40°C to +150°C ±0.5°C Average l~3°C/min full range (non-linear, no load) Average lT/min full range (non-linear, no load) <2°C (no load, constant state) < ±2°C (no load, constant state) Triple-layer vacuum toughened explosion-proof glass Cable port can be opened on the left side of the Chamber Air-cooling or water-cooling French Tecumseh compressor or German Bitzer compressor Touch screen programmable control PLC, with USB interface, RS485 interface for computer control, special network control software for easy remote monitoring and data acquisition 1.0mm SUS304# stainless steel 1.2mm cold roll steel, powder-coated, high-temperature plasticized AC380V 50Hz Automatic explosion-proof and pressure relief device, explosion-proof chain, tri-color light alarm device, remote control, smoke exhaust device, fire extinguishing device, etc. Develop communication protocol for use with charge and discharge tester

Open the catalog to page 1

Lithium Battery 3 zone High and Low Temperature Test Chamber THERMALBTTD3 series-2

Four-deck High and Low Temperature Test Chamber ♦ Internal Size (W x D x H) mm 850*850*400 BTL-D4-289C Extraordinary production performance brings more business.Performance Parameter BTL-D4-289C Structure Air Supply Mode Temperature Range Temperature Fluctuation Heating Rate Cooling Rate Temperature Uniformity Temperature Deviation Observation Window Testing Terminal Cooling Method Compressor Control Internal Material External Material Power Supply Voltage Safety Protection Four working chambers in an integral design (customizable to left and right structures) Forced internal circulation, horizontal...

Open the catalog to page 2