*mydirectindustry

Catalogs
Guangdong Bell Experiment Equipment Co., Ltd
Flammability tester FLAMMABE

Flammability tester FLAMMABE

Product catalog summary

Related Standard Test Requirements
The document references two standards: UL 1642 and GB 31241-2014, which are likely related to safety and performance testing for batteries.

Performance Parameters

Model: BE-8105
Structure: All-in-one with explosion-proof lock and chain on the door.
Burner: Bunsen burner with a 9.5mm inner diameter and approximately 100mm length.
Flame Application Time: 99 hours, 59 minutes, and 59 seconds.
Flame Height: Adjustable between 10mm and 75mm, with a mesh placed approximately 38mm above the flame as per GB31241-2014.
Test Rod Diameter: 6.35mm x 355.6mm.
Enclosure: Octagon shape stainless steel mesh with 610mm distance between parallel sides and 305mm height.
Angleiron Specification: 12.7mm x 12.7mm.
Mesh Top Cover: Square shape with approximately 650mm length.
Test Aluminum Mesh Specification: 0.25mm thickness, 16 grit x 16 grit.
Test Round Hole Surface Diameter: 102mm.
Ignition Device: Automatic ignition.

Display and Control

Display Mode: PLC touch and remote control.
Observation Window: 390x360mm with 20mm thick explosion-proof glass and stainless steel mesh.
Control Method: Remote and automatic control throughout the test.

Combustion Gas Requirements
High purity liquefied petroleum gas, prepared by the user.

Data Output
Test data can be directly output via USB flash disk.

Safety Protection
Includes explosion-proof pressure relief device, smoke exhaust device, fire extinguishing system, electronic door lock system, and safety stop switch.

Options
Additional systems available include temperature acquisition, voltage acquisition, and video monitoring systems.

Product Description
The document describes the DGBELL Battery Burning Tester and Flammability Test Chamber, which are used for testing the flammability of batteries.

Catalog excerpts

Battery Burning Tester Battery Burning Test Chamber Flammability tester Flammability Test Chamber Related Standard Test Requirements UL 1642 GB 31241-2014 Performance parameters Model All-in-one structure, the door with explosion-proof lock and explosion-proof chain Bunsen burner with inner diameter of 0.375inch (9.5mm) and length approx. 100mm Flame Application Time Flame Height *10~75+£2mm (Adjustable) *Mesh should be placed approx. 38mm above the flame (GB31241-201 4) Test Rod Diameter Octagon Shape Stainless Steel Mesh Enclosure Distance between each parallel sides: 24 inches (610mm) Height: 14 inches (305mm). Angleiron:spec. 12.7mmX12.7mm Mesh Top Cover Square shape with length approx. 650mm Test Aluminum Mesh Specification 0.010inch (0.25mm) 16 grit x16 grit Test Round Hole Surface Diameter Ignition Device Automatic ignition Display Mode PLC touch + Remote control Observation window 390x360mm (20mm thick explosion-proof glass, install explosion-proof stainless steel mesh) Control Method Remote control, automatic control through the entire test. Combustion Gas Requirements High purity liquefied petroleum gas. (Prepared by user) Data Output Test data can be output by USB flash disk directly . Safety Protection Explosion-proof pressure relief device, smoke exhaust device, fire extinguishing system, electronic door lock system, safety stop switch Options Temperature acquisition system, voltage acquisition system, video monitoring system DGBELL

Open the catalog to page 1

Flammability tester FLAMMABE

Flammability tester FLAMMABE

Catalog excerpts

All Guangdong Bell Experiment Equipment Co., Ltd catalogs and technical brochures

Archived catalogs