Battery Flammability Tester EXTERNAL-FIRE-BE
1Pages

{{requestButtons}}

Catalog excerpts

Battery Flammability Tester EXTERNAL-FIRE-BE - 1

Battery Burning Tester Battery Burning Test Chambers Flammability tester Flammability Test Chamber Related Standard Test Requirements UL 1642 GB 31241-2014 Performance parameters Model All-in-one structure, the door with explosion-proof lock and explosion-proof chain Bunsen burner with inner diameter of 0.375inch (9.5mm) and length approx. 100mm Flame Application Time Flame Height *10~75+£2mm (Adjustable) *Mesh should be placed approx. 38mm above the flame (GB31241-201 4) Test Rod Diameter Octagon Shape Stainless Steel Mesh Enclosure Distance between each parallel sides: 24 inches (610mm) Height: 14 inches (305mm). Angleiron:spec. 12.7mmX12.7mm Mesh Top Cover Square shape with length approx. 650mm Test Aluminum Mesh Specification 0.010inch (0.25mm) 16 grit x16 grit Test Round Hole Surface Diameter Ignition Device Automatic ignition Display Mode PLC touch + Remote control Observation window 390x360mm (20mm thick explosion-proof glass, install explosion-proof stainless steel mesh) Control Method Remote control, automatic control through the entire test. Combustion Gas Requirements High purity liquefied petroleum gas. (Prepared by user) Data Output Test data can be output by USB flash disk directly . Safety Protection Explosion-proof pressure relief device, smoke exhaust device, fire extinguishing system, electronic door lock system, safety stop switch Options Temperature acquisition system, voltage acquisition system, video monitoring system DGBELL

Open the catalog to page 1

All Guangdong Bell Experiment Equipment Co. catalogs and technical brochures

Archived catalogs