GSK218MC SERIES MACHINING CENTER CNC SYSTEM Product Brief: *GSK 218MC series is a high-level machining center system and the newest man-machine design of which its machining efficiency and cleanness can be compared favorably with the imported medium system. It is very convenient to connect the standard configuration GSK-LINK Ethernet bus and absolute motor (It is the mechanical memory encoder, regardless of that the data may lose out of battery). Product Characteristic: * Five-axis & Five-axis Linkage Function It owns the five-axis control functions, such as the five-axis RTCP (Tool center control) and non-RTCP, sloping surface (3+2 positioning) (4+1 and absolute five-axis) machining. The five-axis linkage high-speed and high-accuracy interpolation function can be carried out the complicated curved surface high speed and accuracy machining to guarantee the quality of the machining precision and surface, simultaneously, improve the machining efficiency. And therefore, the surface of the machining workpiece is with clear veins, and stable at the corner of the transition, clear and activate pointedness characteristic, as well without overcutting and undercutting.

* High-Speed & High-accuracy Function It adopts the high-speed interpolation technology; the complicated curved surface machining efficiency velocity is 8m/min; the optimal machining velocity is 4m/min. Up to 1000 of the pre-treatment sections; it also owns the prospective function, rapid, high-precision and perfect cleanness.

* Convenient Debugging Method The on-line rigidity level debugging function of the bus configuration can further enhanced the machine tool rigidity adjustment and parameter optimization for the machine machining performance, instead of debugging the drive’s parameter one by one, it is simplified accordingly. Also, it has the majorization function of which the system can be optimized a group of parameter by itself to reserve the high-rigidity of the machine.

总线配置在线圆度测试分析功能， 圆度测试可模拟圆周切削运动圆并以此采集电 机码盘位置信息来判断机床各伺服轴响应的同步性和响应速度。 The on-line circular-degree testing analysis function of the bus configuration in which the circular-degree testing can be judged the responsive synchronism and its velocity of each servo axis for the machine tool by imitating the circle to cut a movement round and then collect the motor’s encoder position information based upon it. * Convenient Extension Function I/O boa

Servo board —— Multi-feed-axis extension, pulse conversion from pulse Acquisition board —— Connect the grating etc. measurement feedback equipment Analogy board —— It can be accepted the multi-circuit analogy input/output vo

* Dual-Drive Calibration, Grating Detection Function It has the grating read function: grating bar detects and then adjusts the levelness of the cross beam to guarantee the level accuracy during machining. It has precision stop interpolation and corner smooth treatment function to prevent the corner from overcutting. It has the automatic calibration dual-driving function: The synchronism error between 2 motors can be detected out by the feedback of each motor, and perform the synchronism error compensation. The alarm generates when the synchronism error exceeds the setting value to stop the axis...

OPERATER STEP(AUTO MODE): 2:SWITCH INTO AUTO MODE; 3: PRESS-=START=-. THEN-=CYCLE STARTS. MEASURE MODE WORKPIECE TYPE

Additional panel (Optional)

GSK 218MC-H operation panel installation dim

GSK 218MC-V host machine unit installation dimens

GSK 218MC-V operation panel installation dimension figure Other Explanations: * The application in the standard machine tool. Item Tool magazine Disk manipulator Spindle Motor

The cutting feedrate is F5000mm/min when machining the above-mentioned mold (The material is mold steel) and its operation is stable. The cutter thread at the circular arc corner is clear, no overcutting, no undercutting and distortion etc., as well clear pointedness (closed angle) characteristic, sharp and without inactivation at the pointedness (closed angle) transition; up to Ra0.8um for the roughness on the cavity surface. * Three-Axis Linkage Gear Machining Application  Three-axis linkage (Z, X and C) can be carried out the single-head, multi-head variable pitch and variable-diameter (reducing)...

* Five-Axis Circular Gear Machining Application  Five CNC axes: B— Hobbing cutter spindle revolving movement, C— Workpiece revolving movement, X— Radial feed movement, Y— Tangential feed movement, Z— axial feed movement;  It can be carried out each kind of gear machining such as the direct gear, helical gear, tapering helical gear, conical gear, drum-type gear, chamfering slick gear, worm-gear etc.  It can be achieved multi-gear machining such as the gear-milling and groove etc.  Up to the 4 levels for the gear machining p

* The Application of the High Velocity Drilling & Tapping Machine Tool 40M/MIN rapid positioning velocity, multi-tapping calculation; immediately performs the tool-retraction after tapping to the bottom of a hole with high velocity; and it greatly improves the machining efficiency; Up to 4000 revolutions effective velocity of the spindle tapping; It contents to the tapping requirement from M0.8 to M24, as well to the materials such as the steel, iron, aluminum, iron casting and aluminum alloy etc. Up to 0.005mm for the repeated positioning accuracy; ensure the batch tapping quality.

* Dual-Channel Function Application It is used the bus technology to carried out the dual-channel; each of the channel can be realized the five-axis & five-axis linkage; It can be equipped with the dual tool-magazine to carry out that each channel owns the tool-change function. It can be configured the grating to carry out the closed-loop control of each channel.