CNC-200R-3W/2W

Product catalog summary

Specifications:
The document provides detailed specifications for the YASKAWA SGMGH-20ACA6 and CNC-200R-3W CNC Multi-Spindle Rotary Table. Key specifications include:

Table Diameter: 200 mm (7.87 inches)
Center Height in Vertical: 190 mm (7.48 inches)
Table Height in Horizontal: 290 mm (11.42 inches)
Thru-Hole Diameter: 35H7 mm (1.38H7 inches)
Max Load: Vertical - 125 kg, Horizontal - 250 kg
Gear Ratio: 90:1
Max RPM: 22.2
Pneumatic Clamp Force: 25 kg•m
Hydraulic Clamp Force: 50 kg•m
Indexing Accuracy: 20 seconds
Repeatability: Unidirectional 4 seconds, Bidirectional 8 seconds
Max Radial Load: 1100 kg

Procedures and Features:
The CNC-200R-3W is designed to double productivity by decreasing machining time and cost. It features a multi-points pneumatic brake system for superior clamp torque, ensuring smooth machining without deflection under heavy loads. The design increases machining speed and reduces time on rotating ATC and workpiece loading-unloading.

Accuracy Standards:
The document outlines accuracy standards for the CNC-200R-3W, including:

Table top flatness: 0.01 mm
Parallelism of table top and frame bottom: 0.02 mm
Runout of table spindle center: 0.01 mm
Perpendicularity of table top to frame bottom: 0.012 mm
Table top runout: 0.015 mm
Perpendicularity of table top to frame bottom guide block: 0.02 mm
Parallelism of center line between headstock & tailstock to frame bottom guide block: 0.02 mm

Additional Information:
GSA reserves the right to modify specifications according to customer requirements. Standard accessories include eye bolts and clamping blocks. Models available include CNC-120R, 170R, 200R, 250R, 320R in 2W/3W configurations.

Catalog excerpts

CNC-120R, 170R, 200R, 250R, 320R 2W/3W CNC MULTI-SPINDLE Rotary Table ◎ Double productivity, decreasing machining-time and cost. ◎ Multi-Points pneumatic brake system offers superior clamp torque, insures smooth machining without deflection under a heavy load. ◎ Increasing machining speed, reduce the time on rotating ATC and workpiece loading-unloading. MODEL NO : CNC-200R 3W Multi-spindle Q’ty Table Dia. Type of CNC Rotary Table ITEM / MODEL ITEM / MODEL Gear Ratio Center Height in Vertical (mm / inch) Table Height in Horizontal (mm/ inch) Over all Height in Vertical Without Motor Cover (mm / inch) Width of T-slot (mm / inch) Width of Guide Block (mm / inch) Servo motor type Hydro. clamp force (kg•m) (P:20kg / cm ) Pneu. clamp force (kg•m) (P:5kg / cm2) Indexing Accuracy Class (sec.) Accuracy Standards Parallelism of table top and frame bottom Runout of table spindle center Perpendicularity of table top to frame bottom Perpendicularity of table top to frame bottom guide block Parallelism of center line between headstock & tailstock to frame bottom guide block ※ GSA remains the right of modification. All specifications can be modified according to customers’ requirement. ※ Standard auessory : eye bolts, clamping blocks.

Open the catalog to page 1

CNC-200R-3W/2W

CNC-200R-3W/2W

Catalog excerpts

All GSA TECHNOLOGY catalogs and technical brochures