Alkaline Stationary QKC, QSC, QFD, QFG Series Catalog
16Pages

ALKALINE STATIONARY BATTERY

1.Classification by Battery Type Types of Alkaline batteries Alkaline batteries are classified according to structure, characteristics, etc. as shown in Table 1. Table 1: Classification by Battery Type GS Yuasa Stationary Alkaline batteries QKC(AM-P) Pocket Vented QSC(AMH-P) (The code in parentheses represents JIS C 8706's) QFD(AH-S) Sintered QFG(AHH-S) 2.Classification by Application GS Yuasa's stationary alkaline batteries are classified according to application (example) as shown in Table 2. Table 2: Classification By Application for Alkaline battery GS Yuasa type JIS type (IEC) QKC AH-S...

The structure of alkaline batteries is exemplified in the figure below. Pocket Type Sintered Type

Table 3: Structure of Alkaline batteries Main Parts Type Pocket Type Battery (QKC, QSC) Sintered Type Battery (QFD, QFG) Plate Positive and negative plates are structured a in way that perforated nickel-plated steel pockets containing the active material are arranged within the frame. Positive and negative plates are structured in a way that the active material is packed in the pores of a substrate of sintered metal nickel powder. Battery Container The battery container is made of alkali-resistant synthetic resins, making the inside of the battery visible. Furthermore, two reference lines...

(5). No Electrolyte Replacement (Pocket type & Sintered type) Under normal use conditions, electrolyte replacement is unnecessary up to the end of service life. (6). Excellent Characteristics for Large Current Discharge (Sintered type) Our batteries are excellent in the characteristics for large current discharge with low internal resistance using high performance plates. (7). Superior Charge Efficiency (Sintered type) Our batteries are superior in charge efficiency and can recover their original capacity through charging to 120% of the discharge. Table 4: Basic Specifications of Alkaline...

5. onstant Current and Constant Voltage Charge C (Floating Charge System) (1). pplication of Constant Current charge A Constant current charge is mainly used in initial charge, activation, capacity test, etc. This method is suitable for short time charge and facilitates determination of amount of charge. (2). pplication of Constant Voltage Charge (Floating Charge System) A Floating charge system is a widely used charging method. This is now a generally available system as a DC power supply, in which the batteries are connected in parallel with the rectifier and load. (3). mount of charge...

Graphl. Pocket type:QKC (AM-P) Discharge (25£)

Specification of Pocket Type: QKC(AM-P) Capacity, Dimensions and Weight

Specification of Pocket Type: QSC(AMH-P) Capacity, Dimensions and Weight Common and externals charts (poket type) Single battery externals chart Note: Shape is one example Crowd battery externals chart

Specification of Pocket Type: QFD(AH-S) Capacity, Dimensions and Weight

Comparison between Pocket type & Sintered type GS Yuasa Alkaline Battery Pocket type Alkaline Battery(QKC,QSC) Sintered type Alkaline Battery(QFD,QFG) Remarks Main Applications Emergency Lighting & power Telecommunications, UPS Standby Power Supply UPS, Engine starting, Standby Power supply, Emergency Lighting & Power Pocket type:for medium & low rate Sintered type:for hight rate dischange High Rate Dischange Inferior to Sintered type Charge Effeciency Inferior to Sintered type Necessary charge amount to full capacity: 140% Water Refilling Frequency Inferior to Sintered type Necessity for...

■Safety precautions■ ▲ Be sure to read through the instruction manual before using the battery. ▲ Keep the instruction manual near at hand for future reference. Danger ● The battery may generate hydrogen gas, thus causing a risk of ignition or explosion. Be sure to ventilate the chamber where the battery is used so that the hydrogen gas concentration is kept at 0.8% or lower. ● Do not install the storage battery in a sealed, gas-tight enclosure, near a fire or source of sparks. Violation of this rule may results in the generation of hydrogen gas from the storage battery, causing a risk of...

Request of Cooperation of Recycling Used Alkaline stationary batteries can be recycled. Do not scrap used storage batteries with general waste, but bring them to a place specified by government law. Please contact our sales company for the details. When returning storage batteries, insulate terminals with adhesive tapes. Electric energy still remains in used storage batteries, insufficient insulation of terminals may result in explosion or fire. ● Please read the manual of the product concerned when you use it. ● The design and the specification might be changed without previous notice....