POWER FACTOR CONTROLLER Setup Assistant 3.5" Colorful TFT Display Dynamic Step Diagnosis Optimum Step Value Recommendation Preventive Maintenance with Daily Records Safe and Continuous Power Factor Correction TECHNICAL FEATURES ▪ Three-phase power supply technology that can operate as long as there is voltage on any phase. ▪ Slim ergonomic design with a total depth of 42 mm inside the panel including terminal blocks. ▪ Compensation recovery and continuous response with detection of voltage and current connection failure. ▪ Dynamic diagnosis of compensation steps and automatic value update ▪ Bidirectional compensation for energy consumption and generation ▪ Monitoring generator consumption and line magnitudes with indices different from network indices when the utility is fed from the generator ▪ High resolution colorful, fast and smooth TFT display with smart menu and user-friendly interfaces. ▪ Measurement up to 63rd harmonic for current and voltage ▪ Hybrid compensation with SVC steps with 10,000 step resolution ▪ Automatic current-voltage matching and current direction detection with three-phase and single-phase steps in installation. ▪ Quick configuration of device parameters and start installation with the Setup Assistant. ▪ Setup option with capacitor, reactor or SVC steps only ▪ Setup and compensation option with single current transformer ▪ Compensation protection in low voltage, over voltage, over harmonic, over temperature conditions ▪ Temporary / Permanent inductive and capacitive unmetered reactive power setting for loads measured by the operating meter but not seen by the compensation system ▪ Temporary and permanent target Cos φ setting. ▪ Different Cos φ2 setting when the generator is on. ▪ Hybrid compensation with both contactors and thyristors by differentiating step groups’ discharge times ▪ Measurement, control and management of the AC/DC voltage levels of the step groups’ supply commons ▪ Optimum step value recommendation through advanced Reactive Power Profile (RPP) analysis ▪ Sensitivity to recognize 3-phase capacitor/reactor at 500 VAr with 1000/5 current transformers ▪ Co-aging option for steps ▪ Safe hardware against connection failure in voltage, current, step commons and thermal inputs ▪ Preventive maintenance infrastructure with detailed event/warning/error logging support with date and ti