- Catalogs
- Grup Arge Energy and Control Systems
- NETWORK ANALYZER
NETWORK ANALYZER
NETWORK ANALYZER
- Recording Capabilities: The device can record data to an SD card or USB memory for up to 250 hours, with adjustable intervals ranging from 500 ms to 25 seconds.
- Display: It features a 3.5-inch colorful TFT display with a resolution of 320x480.
- Measurement Range: Capable of measuring current and voltage total harmonic distortions and harmonics from 1st to 63rd order.
- Power Supply: Operates within a wide supply range of 85-265 V.
- Communication: Supports MODBUS RTU protocol with a rich register set and speeds ranging from 4800 to 115200 bps.
- Temperature Range: Operates in ambient temperatures between -10 °C and +55 °C.
- Power Consumption: Measurement inputs consume less than 1 VA.
- Compatibility: Optionally compatible with mini CT-30 type current transformers.
- Measurement Accuracy: Minimum measurement values are 1 mA / 2 V with an accuracy of 0.5 mA / 0.1 V.
- Sampling Rate: Capable of 160 samples per period.
- Enclosure Dimensions: 96 x 96 x 43 mm.
- Digital output with optocoupler isolation.
- Energy, demand, and peak values can be reset from the device menu.
- Measures current and voltage unbalances.
Catalog excerpts
NETWORK ANALYZER Class 0.5S Colorful TFT Display Recording via USB and SD Card Measurement Up to 63rd Harmonic Integrated Input/Output Mini CT-30 Compatible ANL 21 TECHNICAL FEATURES ▪ Device can save the measured parameters to the SD card or USB memory for up to 250 hours in an adjustable period of 500 ms - 25 sec. ▪ Measurement of current and voltage total harmonic distortions and harmonics between 1-63 ▪ Wide supply range of 85-265 V ▪ 3.5 inches 320x480 resolution colorful TFT display ▪ Digital output with optocoupler isolation ▪ MODBUS RTU protocol with rich register set ▪ Operating ambient temperature of the device is between -10 °C and +55 °C. ▪ Energy, demand and peak values could be reset from the device menu. ▪ For Modbus RTU, the device supports speeds of 4800, 9600, 19200, 38400, 57600 and 115200 bps. ▪ Power consumption of the measurement inputs is less than 1 VA. ▪ Optionally compatible with mini CT-30 type current transformers ▪ Minimum measurement value: 1 mA / 2 V ▪ Measurement accuracy: 0.5 mA / 0.1 V ▪ Device can measure current and voltage unbalances. ▪ Device is capable of 160 samples per period. ▪ Enclosure dimension: 96 x 96 x 43 mm
Open the catalog to page 1All Grup Arge Energy and Control Systems catalogs and technical brochures
POWER FACTOR CONTROLLER1 Page
2024 PRODUCT CATALOG96 Pages
