Catalogs >
GRUNDFOS >
TPE3

TPE3
7Pages

Catalog excerpts

INTELLIGENT IN-LINE PUMPING FOR INCREASED SYSTEM PERFORMANCE /

A QUANTUM LEAP IN IN-LINE PUMPING TPE3 PROVIDES UNRIVALLED EFFICIENCY AND A WIDE RANGE OF INTELLIGENT FUNCTIONALITIES THAT MAKES IT MORE THAN A PUMP. MORE THAN A PUMP The TPE3 has a built-in heat energy monitor as well as a flow limiting function that eliminates the need for a pump throttling valve. 0+t^ + <?> = Pump throttling valve Energy monitor CHOOSE THE INTELLIGENT CONTROL MODES A large selection of control modes let you easily customise the operation of your TPE3 perfectly to your needs. FLOW adapt is a control mode that combines the well-known AUTOadapt with the FLOWlimit function....

Open the catalog to page 2

GRUNDFOS iSOLUTIONS TAKE CONTROL OF PRESSURE AND FLOW IMPROVED BUILDING PERFORMANCE BUILT-IN HEAT ENERGY MONITOR FOR COMPLETE CONTROL Connect one or two external sensors to your TPE3 and let the pump take charge of the system’s pressure and flow based on the differential temperature or pressure. Your ∆T will never be too low or too high again, and you can set up all common sensor types via the pump display. The TPE3 features a built-in heat energy monitor that can monitor heat energy distribution and consumption. and help avoid excessive energy bills caused by system imbalances. • Measure...

Open the catalog to page 3

GRUNDFOS iSOLUTIONS APPLICATION EXAMPLES IMPROVE SYSTEM PERFORMANCE NOW! ONE-STRING HEATING SYSTEMS BOILER SHUNT PUMPS INCREASE SYSTEM EFFICIENCY AND AVOID PENALTIES BOILER PROTECTION AND REDUCED COST OF OPERATION In single string systems the design is typically made with constant flow. The result is increased return temperatures from the system in low load situations. A TPE3 pump that operates based on ΔT across the system solves this problem and ensures that ΔT is maintained as originally intended during the design phase. All non-condensing boilers need a minimum return temperature in...

Open the catalog to page 4

GRUNDFOS iSOLUTIONS SENSORS MAKE THE DIFFERENCE Integrated sensor measures differential pressure over the pump for increased efficiency. TAKE A CLOSER LOOK CLAMP RING Specially designed, innovative clamp ring allows for fast repositioning of pump housing and fast service of pump IE5 MOTOR The Grundfos MGE motor is a very efficient motor. The motor is at IE5 level according to IEC DTS 60034-30-2. IMPROVED HYDRAULICS All Grundfos TPE3 pumps have the highest efficiency and are rated with the highest Minimum Efficiency Index: MEI ≥ 0.70 EASY BMS INTEGRATION For connection to BMS, CIM modules...

Open the catalog to page 5

GRUNDFOS iSOLUTIONS EXPECT MORE EFFICIENCY MUCH MORE PERFORMANCE RANGE TPE3 is an extremely energy efficient In-line pump choice – well above industry standards. The motor easily meets IE5 demands, according to IEC DTS 60034-30-2. TPE3 ENSURES SUPERIOR EFFICIENCY ACROSS THE ENTIRE Q/H AREA (SHOWN BELOW) BECAUSE OF ITS UNIQUE COMBINATION OF MOTOR EFFICIENCY, WORLD-CLASS HYDRAULICS AND INTELLIGENT FUNCTIONALITIES The TPE3’s new MGE motor goes far beyond what regulations require. The chart below shows the IE levels in IEC DTS 60034-30-2. The hydraulic pump efficiency for TPE3 is much higher...

Open the catalog to page 6

bethink innovate GRUNDFOS Holding A/S Poul Due Jensens Vej 7 DK-8850 Bjerringbro Tel: +45 87 50 14 00 www.grundfos.com The name Grundfos, the Grundfos logo, and be think innovate are registered trademarks owned by Grundfos Holding A/S or Grundfos A/S, Denmark. All rights reserved worldwide. 98418033 0117/Global Market Segment Building Services/12458-BrandBox

Open the catalog to page 7