GRUNDFOS DATA BOOKLET DIP Measuring amplifiers and controllers, preassembled systems Up to 3 parameters (Cl2, ClO2, O3, pH, ORP)

DIP measuring amplifier and controller 3 DIP-A preassembled systems 3 Type key DIP-A, preassembled systems 5 DIP-A preassembled systems 8

1. Product introduction DIP measuring amplifier and controller DIP-A preassembled systems The DIP (Dosing Instrumentation Pool) is specially designed for swimming pool applications, but can also be used in water treatment applications. It measures up to three parameters and controls two parameters at the same time, giving you perfect control of the water quality. The DIP speaks five languages, making it easy for users without previous knowledge to carry out all operations. Display languages: English, German, French, Polish, Russian. Other features: • maintenance-free measuring electrodes • a...

2. Identification Type key DIP, controllers Example: Measuring amplifier and controller DIP Dosing Instrumentation Pool Chlorine, chlorine dioxide or ozone

Type key DIP-A, preassembled systems Example: Measuring amplifier and controller DIP Dosing Instrumentation Pool Pressure-proof, with electric cleaning motor Pressure-proof, with hydromechanical cleaning Pressureless, with hydromechanical cleaning Pressure retention valve P With pressure retention valve Without pressure retention valve Electrodes for disinfection parameters AU pH, ceramic diaphragm, with buffer solution pH, PTFE diaphragm, with buffer solution pH, KCl filling, with buffer solution pH, gel filling, with buffer solution pH, ceramic diaphragm, without buffer solution pH, PTFE diaphragm,...

3. Technical data General data Electronics Max. distance between DIP and sensors Display Indication mode Relay outputs (max. relay load 250 V/ 6 A, max. 550 VA) Signal outputs (max. load: 500 Ohm) Interface Temperature compensation pH compensation Measuring parameters and ranges 16-bit microprocessor system 3 metres Two high-resolution plain-text LCD displays Measured value as a physical variable 1 alarm relay 1 stand-by relay Each parameter of parameter groups 1 and 2 has: • one alarm relay and • two potential-free controller switch relays for chlorine or chlorine dioxide or ozone or pH. The...

DIP-A preassembled system

4. Product selection DIP controllers Controller mounting Chlorine, chlorine dioxide, ozone Input parameter Enclosure class Enclosure material Product number Type designation DIP-A preassembled systems • Preassembled systems for swimming pool water include measurement of temperature, pH and ORP • Preassembled systems with cell type AQC-D11 or D12 (pressure-proof) include a pressure retention valve Water sensor Product number D13, pressureless, hydromechanical cleaning D12, pressure-proof, hydromechanical cleaning D11, pressure-proof, cleaning motor Cell type Type designation* DIP-A, DIP-A, DIP-A,...

Non-standard range Pressure retention valve Water sensor Temperature Mounting sensor PCB: ceramic diaphragm, with buffer solution PTB: PTFE diaphragm, with buffer solution Product selection PKB: KCl filling, with buffer solution P: with pressure retention valve X: without pressure retention valve RRB: without reference PGB: gel filling, with buffer system, with buffer solution solution AU: gold PT: platinum PCX: ceramic diaphragm, without buffer solution PTX: PTFE diaphragm, without buffer solution RRX: without reference system, without buffer solution T: with Pt100 temperature QS: with water...

Product number Special cable (coaxial), single screening, N screw plug for pH, ORP or reference electrode Note: If the length of the cable between controller and electrode exceeds 3 metres, an impedance converter is necessary. Buffer solutions pH and redox potential (ORP) Description Buffer solutions for calibrating the pH single-rod measuring chain: • 1 set per 100 ml for pH 4.01, 7.00 or 9.18 Product number Buffer solutions for checking the ORP single-rod measuring chain or electrodes: • 100 ml (+220 mV) Impedance converter Interface converter Description Impedance converter CAN bus/RS232 converter...

6. Further product information WebCAPS WebCAPS is a Web-based Computer Aided Product Selection program available on www.grundfos.com. WebCAPS contains detailed information on more than 220,000 Grundfos products in more than 30 languages. Information in WebCAPS is divided into six sections: • Catalogue • Literature • Service • Sizing • Replacement • CAD drawings. Further product information Catalogue Based on fields of application and pump types, this section contains the following: • technical data • curves (QH, Eta, P1, P2, etc.) which can be adapted to the density and viscosity of the pumped...

6 Further product information This section is based on different fields of application and installation examples and gives easy step-by-step instructions in how to size a product: • Select the most suitable and efficient pump for your installation. • Carry out advanced calculations based on energy, consumption, payback periods, load profiles, life cycle costs, etc. • Analyse your selected pump via the built-in life cycle cost tool. • Determine the flow velocity in wastewater applications, etc. Replacement In this section you find a guide to selecting and comparing replacement data of an installed...

6 Further product information GO CAPS Mobile solution for professionals on the GO! CAPS functionality on the mobile workplace.

GRUNDFOS A/S DK-8850 Bjerringbro . Denmark Telephone: +45 87 50 14 00 www.grundfos.com The name Grundfos, the Grundfos logo, and be think innovate are registered trademarks owned by Grundfos Holding A/S or Grundfos A/S, Denmark. All rights reserved worldwide. 96812344 0313 © Copyright Grundfos Holding A/S