GRUNDFOS PUMPS FOR HOME AND GARDEN
Open the catalog to page 1CONTENT MOVING LIQUIDS . . . No matter what volume, pressure, lift or liquid to be pumped, Grundfos can supply precisely the pump needed for the task in hand. Worldwide many installers are already familiar with the Grundfos range of household pumps. From the trusted CH Pressure Systems to the stainless KP wastewater pump, millions of customers can testify to the simplicity of installation and reliability of our household pump series. WATER SUPPLY SELF PRIMING JP5 / JP6 16 JPRain 44 PRESSURE SYSTEMS 8 CME BOOSTER 10 CH-PC & CH-PT 12 PM RAIN This catalogue covers the full range of household pumps...
Open the catalog to page 2SELF-PRIMING Ideal for one or multiple tap outlets to your garden, toilet and laundry, the Grundfos JPRain range offers a reliable solution to help you utilise your collected rainwater in the best possible way. PRESSURE SYSTEMS This range of Grundfos pumps and tanks are designed for any pumping application involving clean and non-aggressive water in household, small scale irrigation and booster applications. SUBMERSIBLE Grundfos submersible pumps are easy to handle and suitable for a variety of applications such as domestic water supply and irrigation. WASTEWATER AND DRAINAGE Grundfos wastewater...
Open the catalog to page 3GRUNDFOS PUMPS Page 38 Page 39 Page 40 Page 41 Page 41 Page 28 Page 20
Open the catalog to page 4THROUGHOUT THE HOUSE Page 26 Page 26 Page 8 Page 12 Page 10 Page 12 Page 30 Page 14
Open the catalog to page 5WATER SUPPLY Making water work Grundfos has water supply pumps for a wide range of domestic applications such as raw water supply, pressure boosting, irrigation and dewatering. Each product ensures constant supply of fresh water to your home and garden, while offering different features and benefits in relation to performance, comfort and convenience.
Open the catalog to page 7The Grundfos CM Booster is a horizontal multistage centrifugal pump designed for domestic and light industrial applications. It is suitable for pressure boosting from above ground rainwater tanks or from mains water. • Quiet operation • Compact design • Robust construction • Easy installation • Generator friendly • All wetted parts stainless steel • Hard wearing carbon / ceramic seal • Complies with AS/NZS 4020 - testing for products for use with drinking water As a guide 1 tap = 10 litres per minute • 1 sprinkler = 15 litres per minute Bare Pumps Only Bare Pumps Only
Open the catalog to page 8HOUSEHOLD WATER PRESSURE SYSTEMS INSTALLATION DIMENSIONS L2 Max 40°C H1 H2 PM1 (1.5 bar) - max 10 m PM1 (2.2 bar) - max 15 m PM2 - max 45 m L1 Max 1m PRESSURE MANAGER COMPARISON NOTE: Pump must be mounted in a PM 2 Pump running indication Alarm indication Dry-running protection Free position in installation Suitable for generator supply Rotary outlet connection Integrated non-return valve Cycling alarm Max PM 1 Power on indication Model pump shed or building. 50°C SELECTION Integrated pressure sensor from Grundfos Direct Sensors™ CH2-40 PC CMB 3-3 CH2-50 PC CMB 3-4 CH2-60 PC CMB 3-5 CH2-60 PC...
Open the catalog to page 9GRUNDFOSCME BOOSTER The Grundfos CME is a compact booster pump for water supply and boosting in domestic and light commercial applications. The integrated speed controller enables the CME to keep constant pressure in the pipe system. • Constant pressure via integrated speed control • Dry run protection with auto-restart • Easy installation & operation • Stainless steel construction for long life • Built-in thermal protection (1 x 240 V) • Inbuilt non-return valve • Stainless steel shaft, impellers and pump housing • Composite terminal box and fan cover • All wet components are 304 Stainless Steel...
Open the catalog to page 10HOUSEHOLD WATER PRESSURE SYSTEMS INSTALLATION DIMENSIONS NOTE: Pump must be mounted in a pump shed or building. Max 20 m o Max 60 C Pre-charge tank pressure 2.7 bar Max 1 m TECHNICAL FEATURES Pump Water Connections Weight P2 (kW) 1ph In (A) temp inlet (A2) outlet (A1) (kg) CME1-4 0.55 3.4 0/60°C 1” 1” 22 CME3-3 1.10 6.6 0/60°C 1” 1” 23 CME3-4 1.10 6.6 0/60°C 1” 1” 24 CME5-3 1.10 6.6 0/60°C 1 1/4” 1” 23 11
Open the catalog to page 11GRUNDFOS CH-PC & CH-PT AR T YE N 2 R RA A W APPLICATIONS Y Provides reliable pressure boosting and water supply while minimising annoying shower temperature fluctuations. FEATURES CH-PC incorporates dry run protection Quiet operation Vital parts made of stainless steel for a long life Built-in thermal protection (1 x 240 V) Electrophoresis coating to resist corrosion CONSTRUCTION CH-PC & CH-PT Stainless steel impellers, intermediate chambers and shaft H [m] Carbon / ceramic seal IP54 motor 50 Insulation Class F 40 Maximum ambient temperature: + 55 °C 30 50 Hz 0 200 250 22 29 300 36 350 400 44...
Open the catalog to page 12GRUNDFOS PM RAIN APPLICATIONS The Grundfos PM Rain is an interconnect device that allows you to utilise your harvested rainwater for toilet, laundry and garden applications, with the added benefit of mains water backup. The PM Rain is used in conjunction with a Grundfos pump. The pump itself is only activated when rainwater is being drawn from the tank. It does not operate when switched to mains. The PM Rain automatically starts when a demand is sensed – for example the flushing of a toilet or filling a washing machine - and will switch over to mains water when your tank is empty or in the case...
Open the catalog to page 14HOUSEHOLD WATER PRESSURE SYSTEMS PM RAIN DEVICE The PM Rain saves you more than just water. The ‘floatless’ operating system allows for speedy installation with no holes to drill or cable to conduit. The PM Rain comes complete with all of the features you would expect, such as automatic changeover and water source indication lights. The PM Rain also incorporates further protection features such as leakage detection (to prevent rapid cycling). The PM Rain is fully certified to AS4020 - The Standard designed to test any product that comes in contact with drinking water. To further reduce the usage...
Open the catalog to page 15GRUNDFOS JP5 / JP6 JET PUMPS AR T YE N 2 R RA A W APPLICATIONS Y The JP pump is a horizontal, self-priming, centrifugal pump for pumping clear water and other non-aggressive liquids. This compact unit, which can be used in a fixed position or transported as required, is easy to maintain and is simple and economical to run. FEATURES JP5 MP & JP5 / JP6 JP5 MP is coupled by a union to the reliable Mondial Press control H [m] 50 45 40 35 30 25 20 15 10 5 0 Suction lift: up to 8 metres, including suction Carry handle Supplied with lead, plug and start/stop switch CONSTRUCTION Stainless steel pump...
Open the catalog to page 165 Pages
2 Pages
20 Pages
24 Pages
21 Pages
3 Pages
59 Pages
3 Pages
5 Pages
2 Pages
2 Pages
2 Pages
92 Pages
11 Pages
28 Pages
9 Pages
3 Pages
10 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
21 Pages
7 Pages
5 Pages
3 Pages
5 Pages
2 Pages
16 Pages
7 Pages
19 Pages
2 Pages
2 Pages
3 Pages
2 Pages
3 Pages
2 Pages
4 Pages
2 Pages
2 Pages
2 Pages
2 Pages
3 Pages
16 Pages
12 Pages
2 Pages
2 Pages
2 Pages
5 Pages
3 Pages
47 Pages
12 Pages
5 Pages
20 Pages
2 Pages
2 Pages
2 Pages
9 Pages
28 Pages
8 Pages
18 Pages
18 Pages
3 Pages
5 Pages
5 Pages
7 Pages
2 Pages
8 Pages
4 Pages
8 Pages
52 Pages
5 Pages
21 Pages
3 Pages
7 Pages
3 Pages
3 Pages
3 Pages
12 Pages
16 Pages
2 Pages
5 Pages
16 Pages
2 Pages
3 Pages
7 Pages
7 Pages
7 Pages
3 Pages
7 Pages
10 Pages
3 Pages
3 Pages
5 Pages
16 Pages
14 Pages
3 Pages
12 Pages
20 Pages
60 Pages
8 Pages
3 Pages
4 Pages
8 Pages
9 Pages
52 Pages
60 Pages
15 Pages
32 Pages