Air filter to protect against dirt and moisture Why use air filters? Fluid containers in hydraulic and lubrication systems are at risk of contamination by undesirable air pollutants. These undesirable air pollutants cause and accelerate the oil’s oxidation. Altered oil properties, such as a reduced load-bearing capacity and lower temperature resistance, are the result. Water ingress may also lead to acid formation and subsequent corrosion forming on various component surfaces. Frequent oil and filter changes, equipment failures and shortened installation lifetimes lead to higher maintenance budgets. Solution: G-LUBE filter Ventilation dryers are installed on hydraulic and lubrication system containers to prevent the ingress of solid particles and moisture during the ventilation of the systems.

Advantages Efficient Cost saving less machine downtime lower lubricant consumption Environmentally friendly G-LUBE filter longer equipment life time savings Technical data Size M: Size L: Size XL Max. displacement volume 682 l/min 682 l/min 682 l/min Components Electret filter Filters out impurities from the air Activated carbon filter Removes dirt, dust, and undesirable particles from the air (particle size > 2 microns) Filters oil from the ambient air Absorbs moisture from the incoming air. The absorbed moisture darkens the granules over time. 4 Prevents contaminations caused by oil mist Baffle...