Water softening without pressure loss? ®! Delta-p With DVGW te certifica s! for all type Delta-p® – triple water softener for the continuous supply of soft water l Extra-easy selection and dimensioning l Plug-and-play installation l Electronically controlled blending l Fresh water guarantee l Patented control valve l Extra-low operating costs
Open the catalog to page 1Triple water softener Delta-p® Triple water softener Delta-p® Water softeners working according to the ion exchange process have been well proven state-of-the-art for several decades and have been used mainly in large housing estates, building complexes or industrial applications with high water consumptions. Pressure losses during softening and the considerable efforts regarding installation and dimensioning of the systems always turned out to be disadvantageous, however, with the new triple water softener Delta-p®, Grünbeck Wasseraufbereitung GmbH has found an entirely new solution to this...
Open the catalog to page 2Triple water softener Delta-p® In general, the exchanger tank can only soften the water for a specific time and then needs to be regenerated prior to resuming the process again. This fact resulted in the development of the following basic system types: 1. Single systems: They have only one exchanger tank. No softened water is available during the regeneration process but hard water may be provided in terms of an emergency supply. 2. Twin systems: Two exchanger tanks are used. While one tank is in regeneration, the other is in operation. As soon as the operating tank is exhausted, the modes are...
Open the catalog to page 3Triple water softener Delta-p® Water softening at the lowest pressure loss possible (< 0.8 bar) The following parameters allow this simple selection: The principle of the ball valve in the water softener Delta-p® does not only ensure the exact symmetry between all three exchanger tanks, but it is also proven to be the valve construction with the lowest pressure loss. This is due to the fact that it consists of only one switchable pipe without any narrow spaces. In addition, the height of the exchanger tanks was kept as low as technically feasible. Thus, all system components were dimensioned...
Open the catalog to page 4Triple water softener Delta-p® System types and optional accessories The Delta-p® is available in sizes 1”, 1 ¼”, 1 ½” and 2” for the treatment of drinking water or industrial water. A low-on-salt alarm can additionally be connected in order to signal a required refill in due time. Apart from the standard brine tanks containing a maximum of 75 respectively 200 kg of regeneration salt, larger ones are available as well. For the comfortable connection to the drinking water pipes, connection sets with shut-off valves, overflow valves and flexible connection hoses are available. All connection hoses...
Open the catalog to page 5Triple water softener Delta-p® Triple water softener Delta-p® Also available as industrial version, without blending device, for the generation of fully softened water < 0.1 °dH Connection data Nominal connection diameter [DN] Min. drain connection [DN] Power supply [V/Hz] (system operation with protective low voltage 24/50 - 60) Connected load/operation = max./standby [VA] Protective system Performance data Nominal pressure [PN] Min./max. operating pressure [bar] Nominal flow rate * [m³/h] Nominal flow rate of blending water (raw water hardness 20 °dH, blending hardness 8 °dH), not Delta-p®-I...
Open the catalog to page 6Parallel piping of Delta-p^/Delta-p® -I Parallel piping of Delta-p®/Delta-p®-l The parallel piping is designed water softeners with equal flows. A maximum of four systems can Tichelman principle. Parallel piping of Delta-p* for connection with equal flows PARALLEL PIPING "All weights indicated are approximate
Open the catalog to page 7Triple water softener Delta-p® mounted on pedestal Delta-p® 2" mounted on pedestal Connection set Delta-p® Low-on-salt alarm (pre-alarm) Pedestal Profibus-DP Water softeners Delta-p®/ Delta-p®-I mounted on pedestal, ready for connection Delta-p®/Delta-p®-I* Dimensions1) [mm] (w x h x d) Diameter of brine tank** [mm] Height of brine tank** [mm] Order no. Delta-p® Order no. Delta-p®-I * Mounted and ready for connection ** Brine tank not mounted on pedestal In case of systems with pedestal, the heights increase by about 200 mm. Grünbeck Wasseraufbereitung GmbH Industriestr. 1 · 89420 Hoechstaedt...
Open the catalog to page 83 Pages
3 Pages
6 Pages
6 Pages
6 Pages
12 Pages
96 Pages
4 Pages
8 Pages
12 Pages
20 Pages