Straight running slat-band chains made of steel and stainless steel SPROCKET Material, dimensions, mass Ultimate Pitch Strength inch Newton [mm] Plate Material Mass Plate Radius kg/m gap min. Carbon Steel Heat-treated Special-alloy Stainless Steel Special-alloy Stainless Steel Austenitic Steel Chrome-Nickel 18/8 SC 800 - K 750* C 30 D-2 Carbon Steel SSC 802 - K 750* C 30 D-3 Special-alloy Stainless Steel SC 805 - K 750* C 30 D-4 Chrome-Nickel Steel 18/8 * These chains are with double hinge Slat-band chains with 1”-pitch made of special stainless steel are available with chain n° SSC 512 Standard...

Side-flexing slat-band chains made of steel and stainless steel Type 8811 for highest demands its flatness arid surface quality with circumferential chamfer as well as its distortion-free welding make this chain especially suitable for pressure-less combiners. The higher demands placed on modern high-performance lines with regard to efficiency, safety and noise reduction led logically to the development of this new generation of side-flexing Type 8811 with bevelled guide shoes Suitable for all market-used magnetic curves Standard length: 80 pitch 10 ft [3,048 m]

Straight running slat-band chains made of thermo plastic [reinforced execution] Material, dimensions, mass Chain n° Standard length: 80 pitch 10 ft [3,048 m] ** GC = smallest wear strip distance recommended for single-strand conveyor Pin Material: stainless steel Straight running slat-band chains made of thermo plastic Type 880 Material, dimensions, mass Chain n° Materials for Pitch type 880 and inch 880 TAB [mm] LF D WR HP AS* Pin Material: stainless steel With designation LF 879 these chains may be supplied with a plate thickness [TT] of 4,8 mm. The chain n° LF 880 TAB may be manufactured with...

Side-flexing slat-band chains made of thermo plastic [reinforced execution] Material, dimensions, mass Chain n° *These chains are also manufactured in HP-material. Pin Material: stainless steel Standard length: 80 pitch 10 ft [3,048 m] Straight running plate top chains Plates made of plastic Matching sprocket Type 843 and 863 Dimensions in mm Basic Chain Standard length: 80 pitch 10 ft [3,048 m]

Side-flexing plate top chains Matching sprocket Type 1873/1874 Direction Plates made of steel and stainless steel Material Dimensions in mm GC Q straight curve Standard length: 80 pitch 10 ft [3,048 m] Plates made of plastic Material Basic Chain Matching sprocket Type 1873/1874 Standard length: 80 pitch 10 ft [3,048 m] Slat-band and plate top chains with rubber attachments For incline conveying the slat-band and plate top chains will be equipped with rubber attachments. The plastic chains will be manufactured with sprayed-on rubbers or rubber inserts moulded into the plates. The steel or stainless...

Low back-line pressure chains made of plastic By using the low back-line pressure chains, it is possible to reduce considerably the accumulation pressure in opposite to an ordinary plastic slat-band chain because the sliding friction of the slat-band chain changes into a rolling friction of the back-line pressure chain. The chain LF 1701 TAB is equipped with down holder tabs for positive guide [e.g. as LF 880 TAB], * The Multiflex chain S 1700 is equipped with a steel plated surface, so accumulation of sharp-edged products is possible, too. ** Suitable for horizontal conveying only!

Plastic mat chains Plastic mat chains are suitable especially for extensive transport of mass products. Their manifold execution variants open a large scope of application. The modular design allows choosing among a number of width dimensions and thus a flexible adaptation to the individual requirements. Because of the great standing surface these chains are especially appropriate for the transport of instable goods. The simple structure and the low weight affect low operation and maintenance expenses. The product group of the plastic mat chains consists of three series that differ in their constructed...

Standard chain width: Series Nominal Chain Width On demand we may supply other widths as well! WHT YSM 50 26 % (6391) – 48 % (6392) 21700 Flights (6391) – Side Guards FDA (WHT) Flights – Side Guards– Transfer Plates FDA Flights – Side Guards FDA Material Pitch [mm] Open surface Nominal strength [N/m] Accessories Certification LF WHT WLT 38,9 31 % 21900 LF – 13100 WHT – 8750 WLT Flights – Side Guards– Transfer Plates FDA – USDA Special attachments at the chain 7705 and 7706 replace the transfer plates. The individual product is moved over the transfer zone without being pushed or damaged. The...

Sprockets for Multiflex chains Type 1700 Plastic drive sprocket with brass bush Idler discs for Multiflex chains Plastic idler disc Special executions and aluminium idter discs may be supplied, too Plastic idler sprocket Idler disc 1700 made of grey cast iron On demand we also supply the idler discs completely with flange and bearing. Please, Split plastic sprockets for slat-band chains Idler wheels Sprockets lubricating plastic full plastic full plaslic Sprockets, colour: natural white Ecological favourable design Execution designs of sprockets and idler wheels made of thermoplastic GRONEMEYER...

Sprockets for slat-band and plate top chains Type 815 for slat-band chains made of steel or plastic Type 820 for plastic slat-band chains Type 821 for double-hinged slat-band chains made of steel or plastic Actual teeth Effective teeth Type 881 for side-flexing slat-band chains made of stainless steel Loose side guards for slat-band chain sprockets are also available short-termed and price-favourable! We also manufacture sprockets with other dimensions, of other materials, as well as according drawings. Type 880 for side-flexing plastic slat-band chains Type 882 for side-flexing plastic slat-band...

Corner tracks for slat-band chains made of plastic material ND-PE or PA 6 G positive guide down holders

Compact corner tracks made of plastic Guide with bevelled side bars = KS The compact corner tracks may be also supplied with inserted magnets intended The compact corners are available for single or multiple application as We also supply individual corner tracks for all side-flexing slat-band and plate top chains. ND-PE: Ultra high molecular polyethylene (UHMWPE) as standard PA 6 G: Cast polyamide with M0S2 additive (only on demand) On request the corner tracks may be supplied with threaded lateral assembly bushes and holes.