How BreakAlube works Experiences with hydraulic hammers shos that 60 seconds is needed in order to offer the maximum dose of grease. That is why BreakAlube will automaticly start a greasing cycle, after the hydraulic hammer has been operating for 60 seconds, in which the preset amount of grease is discharged at the hydraulic hammer greasing point. The grease quantity, 0.2 cc minimum to 4.0 cc maximum per greasing cycle, can be set in the Digital Control Unit. The quantity will be both highly accurate and constant, regardless of the grease temperature or viscosity. This is achieved by measuring the number of pump element strokes. A warning light in the cab will alert the operator when grease is low, the reservoir empty, or when a system error occurs. BreakAlube also allows automatic hammer deactivation as soon as proper greasing is no longer warranted (activation upon request). Security build-in: To prevent damages to the hydraulic hammer or BreakAlube, the system features important standard built-in safety provisions. • reakAlube will only grease when the hydraulic hammer is in operation. B Greasing an inoperative hammer may cause damage in certain situations when the hammer is activated. • reakAlube cannot build up sufficient pressure in the discharge B line when the grease reservoir is empty or when an external line is damaged. In that case, a pressure switch will automatically switch off the pump. • f the pressure in the grease pump runs too high, e.g. because the I hydraulic hammer is not connected, a built-in safety valve will ensure that the grease is pumped back into the reservoir Eventually, the pump will also switch off automatically. • henever an error or failure occurs, a warning light will alert the W operator. • ptionally, switches off the hammer should proper greasing O not be guaranteed. Diagnosis The Digital Control Unit features a memory to store parameter settings and operational data. The greasing settings can be changed with a GINA handheld computer, which also allows you to read out the memory for diagnostic purposes. Pressing the BreakAlube test button for several seconds allows the operator to check the cause of any current error during work. The cause of the error is shown by the flashing warning light in the cab. • eavy-duty tempered pump H element for long life • Heavy-duty eccentric drive axle bearings • nder-pressure and overU pressure detection with warning signal • rease reservoir with springG operated follower plate • ow grease and empty L reservoir warning • utomatic hydraulic hammer A switch-off, to be activated upon request

Digital Control Unit Higher operational safety BreakAlube features a Digital Control Unit that ensures technically correct and safe completion of the greasing cycle. No standstill and repairs due to insufficient or irregular greasing. Less greasing costs • he timer function will start the greasing cycle T after every 60 seconds of operation of the hydraulic hammer. • onitors the discharged quantities of grease and the M working pressure in the system. • Monitors the integrated overpressure valve. • lerts the operator to system errors and low grease. A (blinking light). When the grease reservoir...

Preservation of wrecking hammers BreakAlube When the going gets tough BreakAlube is specifically designed as an automatic greasing system for hydraulic hammers. BreakAlube offers excellent operational reliability under the toughest working conditions. The vital pump parts, including pump element and drive axle bearings, are extremely strong and can build up working pressures up to no less than 275 bar. BreakAlube can be used with greases up to NLGI Class 2 including additives such as graphite and copper.

Groeneveld Durability from within! With over 40 years experience, Groeneveld is a market-oriented company that is continuously responsive to demand and supply. One of these questions is about sustainability and the future with fewer environmental concerns. With certainty our products and solutions will contribute to an optimum efficiency for our customers, such as lower fuel consumption, minimum waste of lubricants, less damage and downtime. All this contributes to a better environment. Groeneveld not only provides solutions for efficiency, but sets for itself also high demands on the internal...