MOBILE DUST EXTRACTOR
2Pages

CLEAN WORKING CONDITIONS easy set up extraction unit dust extractor units Gritco’s extraction units offer easy to move and quickly installed possibilities to contain dust and other pollution to the actual blasting area. Automatic cleaning of the filter cartridges result in a minimum pressure drop and a constant extraction capacity. FULLY OPERATIONAL IN MINUTES In order to avoid environmental hinder, actual blasting areas are often sealed off by scaffolding and tarpaulin covers. Smaller objects can e.g. be blasted inside containers. Of course dust, abrasive and pollution need to be contained to these (temporary) blasting areas. Gritco’s Filter Units create a vacuum and a sufficient air flow that keep these products in the closed off blasting area and can be easily collected. Powerfulinbenefits • etup done minutes S • asy disposal of dust in hoppers with plastic bags or big bags E • reat mobility with forklift openings and lifting lugs G • an be transported with standard size trucks C • utomatic cleaning of filter cartridges including after cleaning A mode • lear indication of cartridge replacement need C Better blasting value • onstant extraction capacity ensured by low pressure drop C • nhanced filter cartridge lifetime thanks to built-in pre-separator E and filter fabric • ilent operation because of ventilator silencer (optional) S • tandard extraction capacities ranging from 3.000, 6.000, 8.000 S and 12.000 m³/h • tatic pressures of 2.000 to 2.950 Pa S Quality includes finish • urable powder coated D • ulti micro fiber cartridges each covering 23.6 m² of filtering M surface • ilter load on cartridges of just 1.06 m³/m²/min F • leaning rate of 99.9% C • aximum dust emission of 3 mg/ Nm³ M Environmentally friendly • ilter unit keeps working area surroundings free from dust, F abrasive and pollution • ontamination is contained to blasting area and can be easily C removed • ower energy use and CO2 emission because of low pressure L drop over the fil

Gritco’s easy to install, dust and pollution containing solution with minimal pressure drop 6 5 2 extractor series 1. Right capacity and vacuum for the blast area size and/or suction hose length 2. Minimal pressure drop over automatically cleaned micro fibre cartridges (each covering 23.6 m2 filtering surface) 3. Suction hose connection and pre-separator plate 4. Easy dust disposal in hoppers with plastic - or big bags 5. Easy unit-installment with lifting lugs 6. Quite operation through (optional) silencer. Return air duct is also possible for blast room use 7. Correct extraction capacity...