NO SLOW ABRASIVE STARTING SHOTgritco gritco FULL SPEED WHEN YOU NEED IT After filling, the vessel gets pressurized first so the abrasive is ‘on full speed' the moment you start blasting. So there's no time-, abrasive- or compressed air loss. Also excessive wear (i.e. of the decompression valve) is avoided. When fitted with ‘Independently controlled multiple abrasive outlets' the ECO series are well suited for use in/as (semi) automatic systems. POWERFUL BENEFITS Immediate start response for precise blasting and more production No slow abrasive starting shot Reduced dust by wet/vapour blasting possibilities Air (and water) cleaning/ blowing off also possible Easy adjustable pressure and abrasive amount settings No pressure drop because of large pipework ENVIRONMENTALLY FRIENDLY Less compressed air consumption means less compressor energy and CO2 Reduced waste and environmental pollution (dust) because of precise abrasive metering Less energy needed to attain the required blasting pressure “Need a lot of start/stop/start intervals (i.e. blasting pipe joints or spot repair)? Then Gritco's ECO Blast Pots are your most ef cient choice. For one because of their unique ‘pressure hold system." BETTER BLASTING VALUE Accurate metering valve for less use of abrasives and dust production Wide choice in tankage varying from 18, 40, 60, 100, 160, 200 to 300 liter Independently controlled, multiple abrasive outlet possibilities (Spare) parts can be easily removed for quick maintenance Can meet any blasting need because of extensive options QUALITY INCLUDES Wear resistant metering valve handles all abrasives (also steel grits, fine aluminum oxide, etc.) Separate main air valve makes for little wear and maintenance No risk of abrasives entering the ‘air section’ because of separate decompression valve Spray painted, galvanized and non-ferrous fittings Completely safe according to European Directive PED 2014/68/EU gritco high qualify blasting equipment

eco series GRITCO'S UNIQUE PRESSURE HOLD SYSTEM SAVES TIME, AIR AND MONEY Unlike conventional blast pots the ECO series vessel gets pressurized right after the machine is lled with abrasive. Because of this 'stand- by mode' the abrasive ow is on full speed the moment you activate the start/stop blasting handle. Only for re lling the vessel needs to be depressurized. This means: a. Improved (more precise) production results.b. No time, abrasive or compressed air is wasted.c. Excessive wear (e.g. of the decompression valve) is minimized. WHAT MORE MAKES GRITCO ECO SERIES YOUR PERFECT BLASTING CHOICE...