Pneumatic Torque Wrenches Extremely compact construction - safe and simple mode of operation - Optimum transmission of high torques Torque setting according to torque flow chart Technical Data The air-driven GLD-Torque Wrenches are used to loose or to tighten bolted connections, even in narrow spaces. GLD-Pneumatic Torque Wrenches guarantees bolting up to 9800 Nm - continuously rotating without an impact mechanism. Heavy-duty gear box - highly developed and proven Free joint execution! After fixing your reaction support (DMA) you will be able to reach any position you may require (rotable 360 degrees) Optimal applications for areas with air supply systems and in high explosion-risk areas. Torque ranges are in accordance with the flow chart. The following torque ranges are theoretical standard dates. Torque exactness depends on a stable air network. Depending on soft and hard joints MD- deviations are possible. Deviations from calibrated values specific to each tool may also be Torque range* approx. Nm Weight without support approx. kg. *At maximum load, please note that there is an available reserve of approx. 20% for possibly increased loosening torques. Attentions: A safe and stable support must be provided in order to transfer the reaction moment. GRIPMOLD GLD with CE-Certification. An air pressure of 2-7 bars at an air volume of approx. 10-15 l/sec ensures optimal operating Flow Chart / Kennlinien Datenblatt 1 Tableau deialonriage Example: Flow Chart GLD for determination of torque values depending on the selected MD position (Pos.) Torque regulation via air supply and a manostat of the maintenance unit Maintenance unit complete with filter, regulator, lubricator as well as hose of 5 meters length including couplings. In order to maximize operational safety pressirized air should be fed by means of a lubricator with a fine oil spray. [email protected] • www.griphold.com Specifications subject to change without notice