Technical Specifications Summary

1. General Overview

The document provides detailed dimensional specifications for various mechanical parts, including sizes, part numbers, and key measurements such as head diameter, overall length (OAL), head depth, and offset. These parts appear to be related to fasteners or specialized mechanical components.

2. Section: GOSW Series Parts

• Parameters: Across different A/F (across flats) sizes ranging from 1.1/16 to 3.1/8 inches.
• Dimensions: Approximate head diameters vary from 5/8 inch to 1.7/8 inch.
• Overall Length (OAL): Ranges from 8.5 inches up to 16 inches depending on the part number.
• Head Depth and Offset: Head depth ranges from 1.1/16 to 3.1/8 inches; offset values range approximately from 15/16 inch to 2.5/8 inches.

3. Section: Larger GOSW Series (GOSW-32 to GOSW-80)

• A/F Sizes: Larger sizes from 21 to 48.
• Head Diameter: Corresponding to A/F sizes, head diameters range from 25 to 48.
• Overall Length (OAL): Between 273 mm and 406 mm.
• Head Depth and Offset: Head depths from 32 to 80 mm; offsets from 30 to 67 mm.

4. Section: GHD0 Series (Socket End Parts)

• Nominal A/F Sizes: 7 to 14.
• Socket End Diameter: Fixed at 25 mm.
• Part Numbers: Range from GHD0 7/75 to GHD0 14/150, indicating variations in size and length.
• Overall Length (OAL): 75 mm, 100 mm, and 150 mm variants.
• Broach Depth: Ranges from 7 mm to 14 mm depending on size.
• Bolt Clearance: Uniformly 1/4 inch.
• Hex Drive Size: Corresponds to nominal A/F size.

5. Section: GSHD0 Series (Hex Drive Socket End Parts)

• Nominal A/F Sizes: 10 to 17.
• Socket End Diameter: Fixed at 25 mm.
• Part Numbers: Range from GSHD0 10/75 to GSHD0 17/150.
• Overall Length (OAL): 75 mm, 100 mm, and 150 mm variants.
• Broach Depth: Ranges from 10 mm to 17 mm.
• Bolt Clearance: Consistently 1/4 inch.
• Hex Drive Size: Matches nominal A/F size.

6. Key Observations and Recommendations

• The document is primarily a dimensional reference for selecting appropriate parts based on size and application requirements.
• Consistent bolt clearance of 1/4 inch across socket end parts simplifies compatibility considerations.
• Broach depth and hex drive sizes scale logically with nominal A/F sizes, aiding in tool selection.
• Offset and head depth values are critical for ensuring proper fit and function in assemblies.

Note: The document contains extensive tabular data with precise measurements for each part number, which should be referenced directly for detailed engineering or procurement decisions.