GFCip Electric Torque Wrenches
2Pages

Electric Torque Wrenches M Uncontrolled monitoring and a processor controlled switch-off electronic guarantee precise repeatability of pre-set torque. RepeatabLe accuracy for switch-off ±5% for identically soft and hard joints. Speed and torque are being controlled Integrated motor protection: GRIPNOLD® GFCIp...plus with automatic safety monitoring. Permanent operation at the upper limit of the tool is prevented by means of a temperature controlled safety function. Thus the motor is sustainably protected against damages in case of a possible overload Two principles of construction within one tool: A-swivelling: free joint motor-/operation unit with the torque pick-up (DMA) B-rigid: fixed joint motor-/operation unit with the torque pick-up (DMA) One-handed operation via a combined switch for comfortable handling: show Right-/Left operation for safe and precise positioning of tool (tap operation) as well as start of screwing Technical Data GFCip Comfortable and high quality screwings with the compact-electric driven-torque tool GFCfp...plus Special Features: Selection of screwing programmes (Modes) with systematic parameter settings, i.e. for desired torque, releasing angle, pre torque, finishing- angle tortion etc. Input, display and menu operation via an integrated LC-Display The user may choose between 2 programmes within the basic equipment. For user specific pre-setting, i.e. frequently arising joints, further modes can be installed optionally. Standard examples Examples of possible user specific programmes Screwing with the torque Option: Automatic release according to pre-set angle degrees Screwing with pre-set Screwing with pre-set angle degrees Screwing (loosening/ Pre-torque and finishing-angle tortion (Mode 2) for high quality screwing aimed at the elimination of as much as possible disturbances! A status display, Le. screwing LO. (ok) or n.LO. (not ok) is implemented. Torque limit-value Recommendation: 20% of the torque limit-value Specifications subject to change without notice Information Determination of finishing-angle tortion The finishing-angle tortion is freely selectable screwing connection be determined - easily and with minor work - with the *Adjustments deviating from the standard upon request info@griphold.com • www.griphold.com

Electric Torque Wrenches GRIPNOLD - GFCip Tools... with Protection Art IP 54. The World novelty of screwing technology with high torques. GFCip with torque ranges from 50 up to 4650 ft. lbs. -19 selectable shut-off torques. Exact torque shut-off when operating at international electric networks as well as operation with emergency units Integrated motor protection with automatic safety monitoring. Permanent operation at the upper limit of the tool is prevented by means of a temperature controlled safety function Brush-free synchronized motor, consistent quality of your screwings and low...