Technical specifications GRIP Operating mode: By operating the hand lever on the upper assembly (1), the crossway bolt is displaced radially. The crossway bolt is pressed into the bore of the lower assembly (2). Withstands high loads with low dead weight Intuitive operation Can be released and closed with one handle High repeat accuracy +/- 0.02 mm Holds up to 5,000 changing cycles Optional connection of an energy feed-through SEK for electrical and pneumatic ducts Technical specifications SHW160 Basic material External diameter x height [mm] Pitch circle diameter [mm] upper assembly lower assembly Recommended load [kg] Operating temperature range [°C] * This guideline applies to the following assumptions: Acceleration: 10 m/s2, gravity distance: 100 mm, double safety This guideline applies to the following assumptions: Acceleration: 5 m/s2, gravity distance: 100 mm, double safety SHW160 Connector, drilled acc. to ISO... G-SHW160-2OE upper assembly, E-Mount, Al, anodized G-SHW160-2UE lower assembly, E-Mount, Al, anodized