Technical specifications GRIP Operating mode: By operating the hand lever on the upper assembly (1), the crossway bolt is displaced radially. The crossway bolt is pressed into the bore of the lower assembly (2). Advantages: Withstands high loads with low dead weight Intuitive operation Can be released and closed with one handle High repeat accuracy +/- 0.02 mm Holds up to 5,000 changing cycles Optional connection of an energy feed-through for electrical With 6 radial pneumatic ducts Technical specifications SHS063 Pro Basic material External diameter x height [mm] Pitch circle diameter [mm] Repeat accuracy +/- [mm] Tension Fz [N] upper assembly lower assembly Recommended load [kg] Pneumatic ducts max. pressure p [bar Operating temperature range [°C] * This guideline applies to the following assumptions: Acceleration: 10 m/s2, gravity distance: 100 mm, double safety This guideline applies to the following assumptions: Acceleration: 5 m/s2, gravity distance: 100 mm, double safety Pos. I Description SHS063 Pro Connector, drilled acc. to ISO... 1 Upper assembly upper assembly, E-Mount, 6 pneum. ducts, Al, anodized lower assembly, E-Mount, 6 pneum. ducts, Al, anodized lower a., E-Mount, 6 pneum. ducts, Al, anodized, M6 inserts