Technical specifications GRIP Operating mode: By rotating the semi-cylindrical bolt by 180°, the upper assembly (1) and the lower assembly (2) are braced in a form-closed manner Withstands high loads with low dead weight Can be released and closed with one handle High repeat accuracy +/- 0.02 mm Resilient locking pin secures hand lever against independent releasing Holds up to 5,000 changing cycles During locking, the lower assembly is pulled around the locking stroke Interface according to DIN EN ISO 9409-1 Optional connection of a multi energy coupling MEK Technical specifications MGW160 Basic material External diameter x Height [mm] Pitch circle diameter [mm] upper assembly lower assembly Recommended load [kg] Operating temperature range [°C] * This guideline applies to the following assumptions: Acceleration: 10 m/s2, gravity distance: 100 mm, 1.6 times safety This guideline applies to the following assumptions: Acceleration: 10 m/s2, gravity distance: 100 mm, 1.6 times safety MGW Connector 0160, drilled acc. to ISO... Pos. I Description G-MGW160-2O G-MGW160-2OE G-MGW160-2OEN G-MGW160-2O-N G-MGW160-2U G-MGW160-2UE G-MGW160-2UEN G-MGW160-2U-N upper assembly, Al, anodized upper assembly, E-Mount, Al, anodized upper assembly, E-Mount, steel, nitrated upper assembly, steel, nitrated lower assembly, Al, anodized lower assembly, E-Mount, Al, anodized lower assembly, E-Mount, steel, nitrated lower assembly, steel, nitrated Replacement semi-cylindrical bolt. Replacement hand lever