Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. GRIP GmbH Handhabungstechnik
  3. MGW050
video corpo

MGW050

MGW050
1 / 1 PageView full catalog

MGW050

Product catalog summary
Overview: The document provides technical specifications for the G-MGW050 model, detailing components, operating conditions, and performance metrics.
Components:
  • Upper Assembly: Available in aluminum (anodized) and steel (nitrated).
  • Lower Assembly: Available in aluminum (anodized), steel (nitrated), and VA.
  • Hand Lever: Designed for MGW050, with a resilient locking pin for secure operation.
  • Other Components: Include semi-cylindrical bolt, index pin, cylinder bolt, setscrew, and spring locking pin.
Specifications:
  • Operating Temperature Range: -30°C to +120°C.
  • Recommended Load: 60 kg.
  • Locking Torque: 50 to 70 Nm.
  • Mass: Ranges from 0.05 kg to 0.14 kg depending on the component.
  • External Diameter x Height: 50 x 30 mm.
  • Pitch Circle Diameter: 72 mm.
  • Repeat Accuracy: +/- 0.02 mm.
  • Compression Force: 1.320 kN.
  • Tension Force: 700 to 1,100 N.
  • Torsion: 80 Nm.
  • Bending Moments Mx, My: 40 Nm.
Operating Mode: The system operates by rotating the semi-cylindrical bolt 180°, which braces the upper and lower assemblies in a form-closed manner. This mechanism allows for high load capacity with low dead weight and can be easily released and closed with one handle.
Advantages:
  • High load capacity with minimal weight.
  • Ease of operation with a single handle.
  • High repeat accuracy of +/- 0.02 mm.
  • Durability with up to 5,000 changing cycles.
Standards: Interface designed according to DIN EN ISO 9409-1.
See more

Catalog excerpts

MGW050-1

Technical specifications GRIP Operating mode: By rotating the semi-cylindrical bolt by 180°, the upper assembly (1) and the lower assembly (2) are braced in a form-closed manner Withstands high loads with low dead weight Can be released and closed with one handle High repeat accuracy +/- 0.02 mm Resilient locking pin secures hand lever against independent releasing Holds up to 5,000 changing cycles During locking, the lower assembly is pulled around the locking stroke Technical specifications MGW050 Basic material Al. anod. External diameter x Height [mm] Pitch circle diameter [mm] Operating temperature range [°C] * This guideline applies to the following assumptions: Acceleration: 10 m/s2, gravity distance: 100 mm, double safety MGW Connector 050, drilled acc. to ISO... Pos. I Description G-MGW050-2O upper assembly, Al, anodized upper assembly, steel, nitrated upper assembly, VA lower assembly, Al, anodized lower assembly, steel, nitrated lower assembly, VA Replacement semi-cylindrical bolt. Replacement hand lever

 Open the catalog to page 1

All GRIP GmbH Handhabungstechnik catalogs and technical brochures

  1. MGW160
    MGW160

    1  Page

  2. MGW125
    MGW125

    1  Page

  3. MGW100
    MGW100

    1  Page

  4. MGW080
    MGW080

    1  Page

  5. MGW063
    MGW063

    1  Page

  6. SHW160
    SHW160

    1  Page

  7. SHW125
    SHW125

    1  Page

  8. SHW100
    SHW100

    1  Page

  9. SHW080
    SHW080

    1  Page

  10. G-SHW050
    G-SHW050

    1  Page

  11. SHS Pro 080
    SHS Pro 080

    1  Page

  12. SHS Pro 063
    SHS Pro 063

    1  Page

  13. SHS Pro 050
    SHS Pro 050

    1  Page

  14. G-SHS160
    G-SHS160

    1  Page

  15. G-SHS125
    G-SHS125

    1  Page

  16. SHS100
    SHS100

    1  Page

  17. SHS063
    SHS063

    1  Page

  18. G-SHS050
    G-SHS050

    1  Page

  19. ZG-AC-IN1-200-M8
    ZG-AC-IN1-200-M8

    2  Pages

  20. G-SWS050
    G-SWS050

    1  Page

  21. G-SHW063-P
    G-SHW063-P

    1  Page

  22. G-SHW063
    G-SHW063

    1  Page

  23. G-SHS080
    G-SHS080

    1  Page

  24. G-AC063
    G-AC063

    3  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.