Hydraulic Press en.griesermbs.com/produkte/hydraulic-press Ejection devices are the ideal complement for change vessels and serve for its residuefree emptying and filling of a downstream system. By separating the mixing and press out process a nearly continuous filling is guaranteed. Special application of this method is applied in the production of adhesives and sealants, fillers and coating compounds, silicones, rubber, ointments and dental filling materials. GRIESER Auspressvorrichtung für Rollenbahn APV 850 RB (123725)

GRIESER Auspressvorrichtung mit starrem Rahmen APV 1400 SR (123732) Grieser VakuumAuspressvorrichtung mit Hubrahmen APV 500 VHR (120000)

GRIESER Hydraulic Press APV8 GRIESER Hydraulic Press APV-15-S

GRIESER Extraction device APV 40 and 110 HS in pharmaceutical version GRIESER Drum Press APV 200 F

GRIESER Hydraulic Press APV 40 HS with Hydraulic Dosing System VDH GRIESER Hydraulic Press APV 35 HS

GRIESER Hydraulic Press APV 90 HR GRIESER Hydraulic Press APV 400 HR

GRIESER Hydraulic Press APV 650 GRIESER Hydraulic Press APV 800 HF

GRIESER Hydraulic Press APV 800 GRIESER Hydraulic Press APV 185 HD Properties The residual free emptying takes place by means of a press plate which can be driven according to the required squeezing pressure manually, pneumatically or hydraulically. Depending on the vessel size, installation and operation requirements there are seven basic types: Type L Laboratory variation for manually inserting the change vessel (up to 10 liters) with a manually operated hydraulic system Type SR

With a rigid frame for the use of change vessel by means of an external lifting device (such as forklifts) Type HR With lift frame, which is inserted in the ground floor to lift up the change vessel Typ HS With a lateral lifting and swiveling device to prevent ground outs. Type HF With a head-lifting device for automated entry and withdrawal of the change vessel to avoid ground recesses Type HD With a transfer device to a separate high-pressure vessel for the realization of press out pressures up to 300 bar for plastic products. Ideal also for use of form jets (e.g. raw material for feeding extruders)...