Protective Sleeve Solutions IDENTIFICATION SYSTEMS GREMARK® GMEC 3X High shrink ratio, wire identification sleeve +125°C -40°C Ratio 3:1 Features/Applications GREMARK® GMEC 3X is a printable, flame retardant polyolefin heat shrink tubing in a ladder format. GREMARK® GMEC 3X offers an excellent solution for cable identification. GREMARK® GMEC 3X is suitable for identifying cables and wires in electrical cabinets, cable harness assemblies. Standard colours: White, yellow. Other colours available on request. Preferred printer / ribbon combination To be used with the GREMTEK printing system - Thermal transfer printer type SQUIX 4 (one side) or XD4 (double side) - Thermal transfer ribbon type GR-TT6100 Spools as standard, marked pieces available on request As a standard GREMARK® is delivered with 2 pre cutting edges. Part numbering system Recommended storage conditions: Keep in cool, dry, ventilated storage (maximum temperature of 50°C) and in closed containers. - Wo'Jw:' o'.::['t-/ca'Yc H not including pre cutting edges - Number of sleeves / spool (xlOO) - Diameter before shrink Shrink ratio Commercial grade Product type 30/09/2015 Rev2 IDENTIFICATION SYSTEM Whilst every attempt is made to provide data that is as accurate as possible the values provided should be treated as a guide only. It remains the responsibility of the user to test the product and determine suitability. GREMTEK shall not be held responsible for any loss or defect resulting from incorrect, improper or inappropriate use of this product.