IDENTIFICATION SYSTEMS GREMARK® GMDR Protective Sleeve Solutions Wire identification sleeve, 2/3:1 ratio Recovery Temp. Features/Applications GREMARK® *0'5 LV D SULQWDEOH ÀDPH UHWDUGDQW diesel resistant SRO\ROH¿Q KHDW VKULQN WXELQJ LQ D ODGGHU IRUPDW IRU FDEOH LGHQWL¿FDWLRQ V\VWHPV GREMARK® GMDR is suitable for identifying cables and wires in electrical cabinets, cable harness assemblies for railway applications. Various SNCF NF F00-608, MRT.H approved. Standard colours: White, Yellow. Other colours available on request. For heat shrink tubing characteristics please refer to GREMTUBE® PGDR. IDENTIFICATION SYSTEMS - GREMARK® GMDR Preferred printer/ribbon combination To be used with the Gremtek printing system - Thermal transfer printer type A4+M (one side) or XD4M (double side) - Thermal transfer ribbon type GR-TT6900 Dimensions Reference GREMARK® GMDR Inside Diameter Mini. (D) Inside Diameter Maxi. (d) Wall Thickness Mini. (t) Packaging (Sleeve/spool) Options Pre-scoring Colour code Printable Area Size Standard colour Part numbering system Recommended storage conditions: Keep in cool, dry, ventilated storage (maximum temperature of 35°C) and in closed containers. G M DR 2 - 0480 - 20 - 0 - 4 G F Colour code Number of pre-scoring (max. 3) Number of sleeves/spool(x100) Diameter before shrink Shrink ratio Railway grade 11/7/2011 Rev1 We certify that the values provided are as accurate as possible. Use of these values, however, remains the sole responsibility of the customer and cannot in any way substitute for testing the product under real conditions of use. The user must assess whether this product is suitable for a particular use. Gremco shall not be held responsible for any loss or anomaly resulting from the correct or incorrect use of this product. GREMCO UK, PO Box 13615, Bromsgrove, B60 9DD, UK Phone:+44(0)1 527 836111, Fax:+44(0)1 527 836601 E-Mail: [email protected] www.gremcouk.com