1. Catalogs
  2. GRELCI MARAS d.o.o.
  3. Wood stamping GM.210

Wood stamping GM.210

Wood stamping GM.210

Wood stamping GM.210

Product catalog summary
Usage: The electrically heated branding stamp is used for marking wood with logos, registration numbers, and ensuring traceability. The mark is permanent and cannot be removed without damaging the surface.
Safety: Adhere to all electrical safety regulations. Do not leave the hot stamp unattended or near flammable materials. Disconnect when not in use or reduce the temperature.
Operation: Allow 20-30 minutes for the stamp to reach the desired temperature (400°C-500°C). Apply light pressure for 2-3 seconds to achieve a permanent mark. Harder woods require longer stamping times than softer woods.
Temperature Regulation: A temperature controller is recommended for consistent branding and to extend the heater's lifespan by reducing heat buildup when idle.
Technical Specifications:
  • Voltage: 230V
  • Power: 2x400W
  • Handle: Plastic-rubber
  • Weight: 1.2 Kg
  • Length: 420 mm
  • Stamp Size: 85 x 45 mm
  • Max Temperature: 550°C
  • Production Capacity: 6 stamps per minute
Contact Information: GRELCI MARAS d.o.o., Jevčeva pot 2, 1351 Brezovica, Slovenia. Phone: +386 1 365 3 518, Email: [email protected], Website: www.grelci-maras.si
See more

Catalog excerpts

Wood stamping GM.210-1

VROÈE ŽIGOSANJE / WOOD STAMPING GM.230

 Open the catalog to page 1
Wood stamping GM.210-2

VROÈE ŽIGOSANJE / HOT STAMPING Use Electrically heated branding stamps (fig.1) are chosen by many businesses in preference to stamping as the brand can depict a design, logo, trademark, registration number, company name and/or address and when applied be a permanent mark that cannot be removed without physically damaging the work piece. Uporaba Elektrièno ogrevan žig se uporablja za oznaèevanje lesa (logo, registracijska številka, sledljivost) Pri uporabi žiga dobi izdelek trajno oznako katere ni mogoèe odstraniti brez poškodbe oznaèenega mesta. Varnost Bodite pazljivi na vse elektriène varnostne...

 Open the catalog to page 2
Wood stamping GM.210-3

VROÈE ŽIGOSANJE / HOT STAMPING Tehnièni podatki: Napetost: Moè: Roèaj: Teža: Dolžina: Velikost žiga: Max temperatura: Zmogljivost: 230V 2x400W Plastika-Guma 1,2 Kg 420 mm 85 x 45 mm 550 °C 6 žigov / minuto Specifications: Voltage: Wattge: Handle: Weight: Lenght: Plate size: Max temperature: Production:

 Open the catalog to page 3
Wood stamping GM.210-4

GRELCI MARAS d.o.o. Jevèeva pot 2 1351 Brezovica SLOVENIJA T: + 386 1 365 3 518 F: + 386 1 365 73 72 E: [email protected] W: www.grelci-maras.si 7

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.