Group: TEXTRON
Catalog excerpts
www.greenlee.com A product video is available, scan this QR code or visit: Power Tools IP56 rated to protect from dust, water, and anything else the jobsite throws at you, Greenlee Power Tools combine long lasting Li-Ion technology with professional design for today’s modern contractor. Saws 142 Drill/Drivers 143 Hammer Drill/Drivers 146 Pivoting Drill/Driver 148
Open the catalog to page 1Power Tools LCS-144 Electrician’s Metal Cutting Circular Saw The Greenlee circular saw is designed primarily to cut metal—almost any metal. This includes conduit, strut, and threaded rod. Plus, the blade doesn’t leave burrs, so chasing threads or filing the edges isn’t needed. The full surround blade guard contains most of the chips, and with its compact size, it will work where larger saws can’t. It even has a LED work light so you can make straight cuts in dark locations. • High capacity battery: 14.4V LI-ION • Lightweight 5.7 lbs (2.59 kg) • IP-56 Rated: Keeps out dust and water • Blade...
Open the catalog to page 2Drill/Drivers Drill/Driver LDD-144 1/2" LI-ION Electrician’s Intertek 3136277 This drill/driver is small and light. It is easy to carry around and easy to fit into tight spaces. Yet, with its 14.4V LI-ION battery, it has enough power to drive Greenlee’s top performing Self-Feeding spade bits—up to 42 holes in 1-1/2" wood with a 7/8" bit. With 18 clutch settings, it can be set to drive just about any screw properly. • Lightweight: 3.7 lbs. (1.68 kg) • IP-56: Keeps out dust and water • High capacity battery: 14.4V LI-ION • High power: 390 in-lb • Clutch torque: 4.4 to 39.0 in-lb, 18 stages (2...
Open the catalog to page 3Power Tools LDD-216 1/2" LI-ION Electrician’s Drill/Driver This drill/driver is a rugged workhorse for day after day heavy-duty drilling, yet at 5.4 pounds it is one of the lightest drills in its class. The high capacity 21.6V LI-ION battery delivers plenty of power to drill up to 139 holes 3/4" diameter in 1-1/2" wood. It includes an accessory handle for better control, and it features an 18 stage clutch so you can drive screws to just the right torque. • Lightweight: 5.4 lbs. (2.45 kg) • IP-56: Keeps out dust and water • High capacity battery: 21.6V LI-ION • Clutch torque: 8.8 to 61.0...
Open the catalog to page 4LHD-216 1/2" LI-ION Electrician’s Hammer Drill/Driver The LHD-216 provides the same heavy-duty drilling and bit driving performance as the LDD-216 drill/driver, plus it offers the hammer function for drilling up to 1/2" holes in masonry. It is truly a multipurpose tool. Turn the chuck collar to any of the 18 clutch positions for bit driving, or to the drilling or the hammer drill position. Yet with all of these functions, it only weighs 5.6 pounds. • Light weight: 5.6 lbs. (2.54 kg) • IP-56: Keeps out dust and water • High capacity battery: 21.6V LI-ION • High speed masonry drilling: ,500...
Open the catalog to page 5Power Tools Hammer Drill/Drivers LRH-144 Electrician’s 1/2" SDS-plus Rotary Hammer Drill/Driver With this one tool, you can do a complete concrete anchor installation. In the hammer mode, you can use a SDS masonry bit to drill the anchor hole. Then you can change to the drilling mode and use the included bit adapter to drive the screw into the anchor. Plus the LRH-144 has 5 clutch settings so you can use just the right amount of torque for the screw. The 14.4V LI-ION battery provides plenty of power to drill up to 12 holes of 1/2" diameter x 1-1/2" deep in concrete. • Lightweight: 5.1 lbs....
Open the catalog to page 6LRH-288 Electrician’s 3/4" SDS-plus Rotary Hammer This is one tough rotary hammer. With its magnesium gear case housing that provides excellent heat dispersal and its cooling fan that flows air around the gear case, it is capable of drilling up to 9/16" diameter holes in concrete continuously. Also, the large cooling fan provides enough air flow to prevent tool-killing dust buildup, and the two-finger trigger is sealed to prevent dust entry. Use the Soft hammer selection for holes up to 3/16" diameter and the Hard hammer selection for holes from 3/16" through 3/4" diameter. • Lightweight:...
Open the catalog to page 7Power Tools Pivoting Drill/Drivers LSD-36 LI-ION Electrician’s Pivoting Drill/Driver This screwdriver can be used to drive a wide variety of screws and to drill small diameter holes. To fit a variety of situations, it can be used as a straight tool or as a pistol style tool. It has 21 clutch stages to precisely provide the right torque for almost any screw, and when the clutch setting is reached, the tool automatically shuts off to save battery and clutch life. • Lightweight: 1.1 lbs. (0.50 kg) • IP-56: Keeps out dust and water • 2 speed reversible: Low: 200 rpm, High: 600 rpm • Clutch...
Open the catalog to page 8All GREENLEE catalogs and technical brochures
-
Bending Evolution
16 Pages
-
Workhorse
9 Pages
-
C3 AutoWhip
4 Pages
-
Inline 2" Cable Cutter
2 Pages
-
K09 SYNCRO
2 Pages
-
Greenlee Catalog
484 Pages
-
Shear 30T
10 Pages
-
CS-5000
2 Pages
-
CMGRT- 100A
2 Pages
-
Megohmmeters
6 Pages
-
ESC25LX
2 Pages
-
EK6IDCLX CRIMPER
2 Pages
-
Hand Tools
46 Pages
-
Fishing
14 Pages
-
Cable Pulling
32 Pages
-
Wire & Cable Termination
60 Pages
-
Communications
108 Pages
-
Test & Measurement
42 Pages
-
Power Tool Accessories
34 Pages
-
Mechanical Catalog
140 Pages
-
Utility Catalog
276 Pages
-
KNOCKOUTS
50 Pages
-
WHAT’S NEW
8 Pages
-
Communication
96 Pages
-
cable pulling: pages 189 to 220
32 Pages
-
Fishing: pages 175 to 188
14 Pages
-
Plumbing
30 Pages
-
Rothenberger
29 Pages
-
Cable Pulling. pages 145 to 176
32 Pages
-
Holemaking
68 Pages
-
Hydraulic Pumps & Miscellaneous
10 Pages
-
Fishing: pages 131 to 144
14 Pages
-
Hand Tools: pages 3 to 40
40 Pages
Archived catalogs
-
BENDING
28 Pages
-
Hand tools: pages 3 to 53
54 Pages
-
Holemaking Catalog
68 Pages
-
Wire & Cable Termination Catalog
52 Pages
-
Voice, Data and Video Catalog
72 Pages
-
Testing & Measurement Catalog
52 Pages