Group: TEXTRON
Catalog excerpts
SAVE MONEY WITH EVERY BEND USING GREENLEE BENDERS. TRUST GREENLEE AS THE INDUSTRY STANDARD FOR BENDING STUBS, OFFSETS, SADDLES, U-BENDS IN EMT, IMC, PVC COATED AND RIGID CONDUIT. Contents Electric Benders Accessory Shoe Groups Hydraulic Benders Hydraulic Pumps Hand Benders Mechanical Benders PVC Heaters & Blankets PVC Accessories Bender Accessories
Open the catalog to page 1Bending Selection Guide Electric Benders Hydraulic Benders Hand Benders Mechanical Benders Electric Benders Hydraulic Benders Hand Benders Mechanical Benders Electric Benders Hydraulic Benders Hand Benders Mechanical Benders Electric Benders Hydraulic Benders * 1818,1818R, 555C, 555CX, 555DX can also bend Stainless Steel Rigid conduit In the same size conduit ranges as steel Rigid conduit using the Rigid shoe group. t For Stainless Steel EMT conduit bending 855GX can bend 1 "-2"; 555C, 555CX, 555DX can bend 1/2", 3/4" & 1-1/2"; and 1818 &1818T can bend 3/4" & 1" with respective EMT shoe...
Open the catalog to page 2ELECTRIC BENDERS IntelliBENDER® Electric Conduit Bender • The 855GX is Greenlee’s most advanced programmable bender 95R7 SIMPLE. READY TO BEND IN 2 STEPS PRODUCTIVE. 4X FASTER SETUP ACCURATE. LESS SCRAP & REWORK 1 RELIABLE. MORE UPTIME TO BEND SPECIFICATIONS Amperage Rating Power Source Capacity A PRODUCT VIDEO IS AVAILABLE, SCAN THIS QR CODE OR VISIT: 20 AMP GFCI-Protected Receptacle 120 VAC 3/4" - 2" Rigid 1" - 2" EMT/IMC 532 LBS DESCRIPTION Bender, Electric Conduit - Programmable (120 VAC, 20A) Shoe Group, 1/2" - 2" PVC Coated Rigid (855GX) SHOE GROUP CONDUIT TYPE EMT EMT EMT EMT Rigid4...
Open the catalog to page 3.v^fe. VERSATILE. TVL)US 1 SHOE BENDS Vi TO 2" AVAILABLE, SCAN THIS QR Capacity 1/2" - 2" Rigid / EMT / IMC / PVC Coated Simple switching between vertical and horizontal bending configurations ABSOLUTE ENCODER STOPS BENDING AT PRECISE ANGLES • Digital pendant sets angle and monitors process SOLID STATE ELECTRONICS RATED • Solid state system eliminates arcing and prevents damage from temporary power loss Shoe Group, 1/2" - 2" PVC Coated Rigid CONDUIT SIZE CONDUIT TYPE SHOTGUN SHOE FOR 854DX BENDING RADII CONDUIT SIZE CONDUIT TYPE INCHES MM
Open the catalog to page 4• The 555 Series, commonly referred to as the “triple-nickel”, has been completely re-engineered with a rugged exterior for the most demanding environments • The 555CX has solid state electronics the eliminates arcing and prevents damage from temporary power loss. The solid state electronics system is rated for 1,000,000+ bends • Operated by a pendant constructed with a high-impact over-molded case and rare earth magnets for strong holding power to the bender A PRODUCT VIDEO IS AVAILABLE, SCAN THIS QR CODE OR VISIT: DESCRIPTION Electric Bender, Standard Pendant (120 VAC, 20A) Electric...
Open the catalog to page 5BENDING 555® Classic Electric Benders for Conduit and Pipe • The 555C Classic Series features simple relay controls for easy field repairs, and compact handle design to prevent interference with conduit when bending • Bend 1/2" – 2" Rigid, IMC, EMT & PVC Coated Rigid • Shoe groups available for different combination SPECIFICATIONS Capacity 555RSC: ½” – 2” Rigid (1/2” – 2” IMC with IMC Roller Support) 555ESC: ½” – 2” EMT 555C Classic Series: 120 VAC; 20 amp GFCI-protected 555C: 260 LBS 555RSC/555ESC: 320 LBS Power Weight Classic Electric Bender power unit without bending accessories Classic...
Open the catalog to page 6ACCESSORY SHOE GROUPS • Bend 1/2" to 2" on one shoe* • No loose pieces • One time setup • Less lifting reduces operator fatigue • Works with Greenlee® 555CX, 555DX and 555C electric conduit benders * ELECTRIC BENDER COMPATIBILITY 555C 555CX/555DX PVC-Coated Shoe Group, 1/2” to 2” A PRODUCT VIDEO IS AVAILABLE, SCAN THIS QR CODE OR VISIT: Separate shoes used for different conduit types (Rigid/IMC, EMT, and PVC-Coated) The IMC squeeze roller is required when bending IMC for the 555CX/DX 1/2" – 2" Rigid/IMC Shoe Group KEY A B DESCRIPTION Rigid/IMC Shoe Group, 1/2” to 2” 1/2” to 2” Bending Shoe...
Open the catalog to page 7BENDING 1/2” – 2” 40 MIL PVC-Coated Rigid Shoe Group KEY A B DESCRIPTION Shoe Group, 1/2" to 2" PVC Coated Rigid (555 Series) 1/2” to 2” Bending Shoe 1/2” to 2” Roller Support Metal Storage Box Shoe Group, 1/2” – 2” PVC Coated Rigid (855GX) Shoe Group, 1/2” – 2” PVC Coated Rigid (854DX) Shotgun Shoe for 555 Benders PRODUCTVE. BEND UP TO 4 PIECES OF CONDUIT AT THE SAME TIME UNIQUE NESTED GROOVE DESIGN LIGHTWEIGHT. EASILY TRANSPORTED TO BE USED IN PRE-FABRICATION SHOPS AND JOB-SITES * Based on an estimated labor rate ($100/hr) and conduit usage A PRODUCT VIDEO IS AVAILABLE, SCAN THIS QR CODE...
Open the catalog to page 8Shotgun Shoe for 854DX Benders • Works with Greenlee's 854DX Electric Bender • Adjust length indicator to set different heights for stubs and kicks • Up to 2X faster bend cycle time – pays for itself in less than 1 year* * Based on an estimated labor rate ($100/hr) and conduit usage Shotgun Shoe for 854DX Bending Shoe Roller Support Unit Hook Assembly Length Indicator (Includes long & short clamp) Metal Storage Box Adapter Kit (Includes Roller Support, Length Indicator, and mounting hardware) SHOTGUN SHOE BENDING RADII CONDUIT SIZE 3/4" 1" 1/2" 3/4" 1" CONDUIT TYPE EMT EMT IMC/Rigid...
Open the catalog to page 9HYDRAULIC BENDERS EMT, IMC and Rigid Cam Track Conduit Benders for 2-1/2" to 4" ® • One bender to bend EMT, IMC and Rigid Conduit • Fast and easy setup on the job site • True One-Shot 90° bends with CT models for quick accurate bends. • Steel reinforced follow bars for long life • Bend a 90° elbow in 4" Rigid conduit in 95 seconds Capacity Power Source 2-1/2" - 4" EMT, IMC and Rigid 980: 120 VAC Electric Powered Hydraulic Pump 980-22PS: 220 VAC 50/60 Cycle Electric Powered Hydraulic Pump 881MBT: 300 LBS (136kg) 881CTE980: 1026 LBS (465 kg) 881CTDE980: 999 LBS (454 kg) NOTE: See next page...
Open the catalog to page 10All GREENLEE catalogs and technical brochures
-
Bending Evolution
16 Pages
-
Workhorse
9 Pages
-
C3 AutoWhip
4 Pages
-
Inline 2" Cable Cutter
2 Pages
-
K09 SYNCRO
2 Pages
-
Greenlee Catalog
484 Pages
-
Shear 30T
10 Pages
-
CS-5000
2 Pages
-
CMGRT- 100A
2 Pages
-
Megohmmeters
6 Pages
-
ESC25LX
2 Pages
-
EK6IDCLX CRIMPER
2 Pages
-
Hand Tools
46 Pages
-
Fishing
14 Pages
-
Cable Pulling
32 Pages
-
Wire & Cable Termination
60 Pages
-
Communications
108 Pages
-
Test & Measurement
42 Pages
-
Power Tool Accessories
34 Pages
-
Mechanical Catalog
140 Pages
-
Utility Catalog
276 Pages
-
KNOCKOUTS
50 Pages
-
WHAT’S NEW
8 Pages
-
Communication
96 Pages
-
cable pulling: pages 189 to 220
32 Pages
-
Fishing: pages 175 to 188
14 Pages
-
Plumbing
30 Pages
-
Power Tools
8 Pages
-
Rothenberger
29 Pages
-
Cable Pulling. pages 145 to 176
32 Pages
-
Holemaking
68 Pages
-
Hydraulic Pumps & Miscellaneous
10 Pages
-
Fishing: pages 131 to 144
14 Pages
-
Hand Tools: pages 3 to 40
40 Pages
Archived catalogs
-
Hand tools: pages 3 to 53
54 Pages
-
Holemaking Catalog
68 Pages
-
Wire & Cable Termination Catalog
52 Pages
-
Voice, Data and Video Catalog
72 Pages
-
Testing & Measurement Catalog
52 Pages