• Reduces unexpected downtime • Assists with planned maintenance • Monitors process and critical fan components • Communicates with building automation systems

Fan Monitoring System Greenheck’s Fan Monitoring System (FMS) is designed to allow facilities and maintenance managers the ability to stay connected with their critical ventilation products. The FMS package includes a preprogrammed monitor along with a wide selection of commonly applied sensors to monitor the overall equipment health, plan maintenance, and monitor energy usage. Fan Monitoring System Benefits Pre-programmed electronics with commonly applied sensors Applicable to any fan type in easy to access or remote locations - Commercial buildings Connects with Building Management System (BMS)...

Sensor Packages Sensor Kit + Monitor = Fan Monitoring System Sensor Kits Pressure Airstream Temperature Bearing Temperature Measure current owing to the motor. Package provides actual run time hours, maintenance notications, real-time and cumulative energy usage and operation alarms. Current Only Current and Vibration Kit combination conrms fan operation, actual run time, maintenance notications, energy usage and vibration readings for trending fan condition and alarms. Provides maintenance notications through actual run time and monitors fan speed with conrmation of operation and alarms for...

Fan Monitoring System Fan Monitor Bearing Temperature Sensor Kit Kit includes: single thermocouple, transmitter and conduit enclosure • J type thermocouple terminal ring with wiring 4 ft. (1.2 m) length • Push button temperature transmitter with LED for visual sensor fault and programming mode • NEMA-4X (IP 66) transmitter mounting enclosure • Temperature Range: o Temperature Terminal Ring: 32 to 482°F (0 to 250°C) o Transmitter: -4 to 158°F (-20 to 70°C) • Output Signal: 4-20 mA • Accuracy: ±0.9°F (±0.5°C) NEMA-4 and IP56 Enclosure Rating Factory calibrated, plug and play wiring 120-240 Vac...