Enduro® SN20 Coating
1Pages

{{requestButtons}}

Catalog excerpts

Enduro® SN20 Coating - 1

Reduces Friction and Extends Life for Wear Parts enduro™ SN20 / product data DENSE PROTECTIVE COATING Enduro™ SN20 is a dense, conformal, clear coating offering superior protection from oxidation in high temperature applications. With superior wear resistant properties, the coating extends component life and cleaning cycles. The coating is suitable for a wide variety of substrates, including complex-contour shapes, for extended application usage. Offering excellent chemical resistance, Enduro SN20 acts as a highly effective permeation barrier to protect substrate materials from contamination. These barrier properties include excellent plasma resistance, minimized particulation for maximized production and Enduro SN20 coated component increased chip yields. TYPICAL PROPERTIES Physical FEATURES & BENEFITS Density, gm/cm Hardness, DPHN • Suitable for many substrate materials, including metals and ceramics, offering greater application usage • Superior protection from oxidation in high temperature applications for increased component life and decreased maintenance costs • Dense, exceptionally adherent coating with high temperature resistance • Reduced particulation offers maximum production yield • Thickness range up to 10μ Electrical & Thermal Dielectric Strength, kV/mm Electrical Resistivity, Ω∙cm Coefcient of Thermal Expansion, 1/°C (1/°F) TYPICAL APPLICATIONS Maximum Service Temperature • Used in a variety of plasma chamber environments Thermal Conductivity, W/m°K Statements and recommendations in this publication are based on our experience and knowledge of typical applications of this product and shall not constitute a guarantee of performance nor modify or alter our standard warranty applicable to such products. Contact Us Greene, Tweed Semiconductor & Solar Kulpsville, PA, USA Prior to actual use it is recommended compatibility tests be run to determine suitability in a specic application. This is critical where failure could result in injury or damage. A regular program of inspection and replacement should be implemented. Greene, Tweed technical personnel are available to help with a recommendation. © 2009, Greene, Tweed all rights reserved All trademarks are property of their respective owners. 08/09-GT DS-US-SC-108

Open the catalog to page 1

All GREENE TWEED catalogs and technical brochures

  1. ESE SEAL

    2 Pages

  2. ENERCAM SEAL

    2 Pages

  3. HP Bearings

    6 Pages

  4. AR®HT

    2 Pages

  5. Sapphire

    2 Pages

  6. Voraz® 511

    2 Pages

  7. CeraComp®

    6 Pages

  8. O-Rings

    2 Pages

  9. ACT® Ring

    9 Pages