CHAIN FITTINGS greenpin.com This catalogue may contain information that has not been updated since the release of this catalogue and has thus become outdated. Please consult the specific product pages on the Green Pin® website for the most up to date technical information.

Depending on the type of product and certificate availability for a certain product, the below mentioned certificates are used in this catalogue. For more information see page 5. HAIN FITTINGS Certificate types 2.1, 2.2, 3.1, DGUV and CE can be supplied at no extra charge. For all other certificates, additional costs will be charged. This catalogue may contain information that has not been updated since the release of this catalogue and has thus become outdated. Please consult the specific product pages on the Green Pin® website for the most up to date technical information.

and lashing equipment including hooks, swivels, lifting eyes and shortening clutches. What makes it the leading brand? Only Green Pin® combines innovative, high-quality products with industry-leading availability and comprehensive, worldwide support. This unique combination means that with Green Pin® products you are always ready to get the job done. You are Green to Go. Green to Quality Work easier with Green Pin® products that are produced to perfection To ensure reliability and quality, Green Pin® products tick all the boxes: • Developed with a clear view of what you need. When cost-effectiveness...

INTRODUCTION General In case you do not use the products yourself but are reselling these as part of a manufactured product, please take our general cautions and warnings into account and make these known to your customers as well. In any case, we do not accept any responsibility or liability, nor can we be held responsible for any misuse or damage with, by or at your customers due to negligent use. Definitions Material Various raw materials are used for the production of chain fittings, depending on the use of the finished product. The following raw materials may be used: • Alloy steel, quenched...

The following abbreviations are used in this catalogue: Product name abbreviations (for example, Green Pin® Self Locking Hook CL GR10) Our company has been ISO certified by Lloyd's; currently we are ISO 9001-2015 certified. Depending on the type of product and certificate availability for a certain product, below mentioned certificates can be provided. This catalogue may contain information that has not been updated since the release of this catalogue and has thus become outdated. Please consult the specific product pages on the Green Pin® website for the most up to date technical information....

Conditions Certificate types 2.1, 2.2, 3.1, DGUV and CE can be supplied at no extra charge. For all other certificates, additional costs will be charged. Free of Charge: 2.l| 2.2| 3.l| DGUV| MPI | MPI | CE With additional Charges: On request the proof load test certificates can be supplied surveyed by an official classification society, such as DNV GL, BV or any other officially certified inspection body. Specific details of certificate availability can be found in each product chapter. Please verify your certification requirements at the time of order. For more information and specifications,...

General cautions and warnings All WLL’s indicated in this catalogue or in other Green Pin® literature or publications are only applicable to recently-supplied, new and unused products used under prescribed operating conditions. Any extreme circumstances or shock loading that occur during use must be taken into account when specifying the products to be used. The WLL should be applied in in-line lifting. Overloads must be avoided. Side loads should be avoided too, as the products are not designed for this purpose and the application of a side load may significantly decrease product life. The WLL...

Handling of the load • It is important to check the sling before lifting. Check if the manufacturer of the load indicates any specific instructions for the lifting of the load. Before starting the lift, make sure that the load is free to move and is not bolted down. Also check if no loose objects could fall down from the load. The path between the current location of the load and the new one must be free. • The weight of the load must be known in order to select a sling with the correct WLL. If the weight of the load is not marked, the information should be obtained from the consignment notes,...

The point of destination of the load should be prepared and should be adapted to the weight and shape of the load. The access to this site must be clear of any unnecessary obstacles and people. The load should be lowered carefully. Avoid trapping the sling beneath the load as this may cause damage to the load or sling. Before taking the tension off the sling legs, the load should be checked to ensure that it is properly supported and stable. The sling should be removed by hand and not with the lifting device. The load should not be rolled off the sling as this may damage the sling. When not in...

Grade 80 Working Load Limit table Temperature If extreme temperature situations occur, the following load reductions must be taken into account: Working Load Limit table for Grade 80 Chain Slings (US) 0°<B < 30° I 30°<B < 45° I 45°<B < 60° ~0°<B < 30° I 30°<B < 45° I 45°<B < 60° Safety factor Safety factor Safety factor Safety factor Safety factor Safety factor 1.73 1.4 1.0 2.6 2.1 1.5 Working Load Limit table for Grade 80 Chain Slings to EN 818-4 This catalogue may contain information that has not been updated since the release of this catalogue and has thus become outdated. Please consult the...

If extreme temperature situations occur, the following load reductions must be taken into account: 0°<B < 30° I 30°<B < 45° I 45°<B < 60° ~0°<B < 30° I 30°<B < 45° I 45°<B < 60° Safety factor Safety factor Safety factor Safety factor Safety factor Safety factor 1.73 1.4 1.0 2.6 2.1 1.5 Working Load Limit table for Grade 100 Chain Slings to EN 818-4 Chain 0 This catalogue may contain information that has not been updated since the release of this catalogue and has thus become outdated. Please consult the specific product pages on the Green Pin® website for the most up to date technical information....