1. Catalogs
  2. Grayhill
  3. CAN-bus Keypads for Off-Highway Vehicles

CAN-bus Keypads for Off-Highway Vehicles
1 /4Pages

CAN-bus Keypads for Off-Highway Vehicles

CAN-bus Keypads for Off-Highway Vehicles
1 /4Pages

Catalog excerpts

CAN-bus Keypads for Off-Highway Vehicles-1

CAN-bus Keypads for Off-Highway Vehicles • Five standard keypad form factors available • J1939 and CANopen versions • Dimmable LED indicators and legends • Sealed to IP67 • Vibration and impact resistant • Operating temp: -40oC to +85oC • Long life: 1,000,000 cycles per key • Support for multiple key press combinations • Designed for 12/24 volt systems • Custom legends and configurations available 3K SERIES KEYPADS CUSTOM OPTIONS Contact Grayhill to build your custom part number • Custom keytop legends • Up to 3 LED indicators per key • Indicator colors: Red, Amber, Green, Blue • Custom backlight colors: Red, Amber, Green • Factory configured parameters Your Experts in Cab Controls Grayhill specializes in the design, development and production of human interface controls, including: - Cab user interface design - Customizedcontrol panels - CAN-bus interface devices

 Open the catalog to page 1
CAN-bus Keypads for Off-Highway Vehicles-2

DIMENSIONS in inches (and millimeters) ISO Symbols shown in dimensional drawings MOUNTING INFO Use M6 Nut (1mm pitch) Max Torque 25 in-lbs STANDARD LEGEND SETS if CONNECTION 4 pin Deutsch DT Connector. Power with 8V to 32V vehicle type inputs. Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com

 Open the catalog to page 2
CAN-bus Keypads for Off-Highway Vehicles-3

DIMENSIONS in inches (and millimeters) Panel cut-out geometry for 4x3 keypad. Panel cut-out geometry for 4x2 keypad. Panel cut-out geometry for 2x4 keypad. Panel cut-out geometry for 2x3 keypad. Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois

 Open the catalog to page 3
CAN-bus Keypads for Off-Highway Vehicles-4

ENVIRONMENTAL TESTING STANDARDS PHYSICAL TESTING STANDARDS Conducted Emissions SAE J1113-41, Control/Signal lines only Operating temperature, High ANSI/ASAE EP455 5.1.1 +85°C for 11 hours Operating temperature, Low ANSI/ASAE EP455 5.1.1 -40°C for 4 hours Storage Temperature, High ANSI/ASAE EP455 5.1.2 +85°C 4 hours Storage Temperature, Low ANSI/ASAE EP455 5.1.2 -40°C 4 hours Thermal Shock ANSI/ASAE EP455 5.1.3 -40°C to 70°C at a rate of 4°C/ Altitude (Barometric Pressure) ANSI/ASAE EP455 5.2 101.3kPa to 18.6kPa Sand and Dust ANSI/ASAE EP455 5.3 24 hours with 0.88g/m3 Solar Radiation ANSI/ASAE...

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.