6.5-inch VGA Display for Vehicles • Ideal for gauges, diagnostic menus and other ancillary functions • Capable of displaying three simultaneous video feeds • J1939 compliant CAN interfaces • Interface with Grayhill’s 3J Series Vehicle Display Controller • Sealed to IP67 • Optional touch screen • 5 soft keys for menu selection • Adjustable backlight on soft keys • Die cast mount or RAM mount compatible • Full color TFT • LED backlight • VGA resolution (640x480) • 16 bit color • Brightness 650 nits (measured) ENVIRONMENTAL SPECIFICATIONS Operating temperature ANSI/ASEA EP455 5.1.1 Level 2 -30°C to +65°C Storage Temperature ANSI/ASEA EP455 5.1.2 Level 2 -40°C to +85°C Thermal Shock ANSI/ASEA EP455 5.1.3 -40°C to 70°C at a rate of 4°C/min (1 hour at extremes) Altitude (Barometric Pres- ANSI/ASEA EP455 5.2 101.3kPa to 18.6kPa sure) Sand and Dust ANSI/ASEA EP455 5.3 24 hours with 0.88g/m3 Solar Radiation ANSI/ASEA EP455 5.4 43-75W/m2 UV Radiation (280-400nm wavelength) 300h EMBEDDED COMPUTER • 64MB SDRAM • 128MB NAND program, and file system FLASH • Windows CE or Linux Operating System* • Real time clock with 10 year battery backup INPUT / OUTPUT • 1 USB host port • 3 NTSC/PAL video inputs • Input voltage: 9VDC to 32VDC CONNECTOR • AMP 776164-1 mating connector • AMP 770520-1 or AMP 770854-1 contacts Ingress Protection / Rain ANSI/ASEA EP455 5.6 Level 2 375 kPa and 8.3 L/min for 10 minutes @15°C water temp Humidity ANSI/ASEA EP455 5.13 96% humidity at 35°C for 240 hours Salt Fog ANSI/ASEA EP455 5.9 5% aqueous solution of NaCl @ 35°C and Chemical resistance ISO 16750-5 EP 455 (5.8.2) See Table 1 Thermal Cycling ISO 16750-4 -40° to 85°C 2 hours at extremes change rate = 1°C/min (8 hours) repeat for 30 cycles. CERTIFICATE: CE MARK PART NUMBER | DESCRIPTION 3D65XK-1006 6.5 inch VGA Display, Windows CE6 3D65TK-1006 6.5 inch with touchscreen, WIN CE6 * Contact Grayhill for Linux version. Your Experts in Cab Controls Grayhill specializes in the design, development and production of human interface controls, including: - Cab user interface design - Customized control panels - CAN-bus interface devices

POWER CONSUMPTION 8.5 W typical MOUNTING INFO Use M6 Nut (1mm pitch) Max Torque 25 in-lbs Maximum Load ANSI / ASAE EP455 Sec 5.1.1 T(min) = -40C, T(max) = +65C Over-voltage ANSI / ASAE EP455 Sec 5.10.2 Level 1, extended to 36V Reverse Polarity ANSI / ASAE EP455 Sec 5.10.3 extended to -36V Short-circuit Protection ANSI / ASAE EP455 Sec 5.10.4 extended to 36V Starting Profile ISO 16750-2 Sec. 4.6.3 12V, Code C / 24V Code E Battery-less Operation ANSI / ASAE EP455 Sec 5.11.3 Level 1 Load Dump ISO 7637-2 Pulse 5b Us = 174V, Ri = 2 Ohms, Td = 350mS, Switching Spikes ISO 7637-2 Pulse 3a and 3b Pulse...